Setting the clock
When the oven is first plugged in, the Display shows 88:88. If the electric power ever goes off the Display will also show all 8’s when the power comes back on.
You can cook or use the Minute Timer without setting the clock, but the display will be blank after cooking The oven door must be closed before setting the clock.
DO THIS...
1. Touch CLOCK SET.
THIS HAPPENS...
. | The Signal Light on the CLOCK SETpad WIII | ||
come on | Start | touchrng number pads for the | |
q | desired trme within 5 seconds The Display | ||
WIII show | a “0” | ||
| The Display will show what numbers you | ||
| touched in the order you touched them. | ||
| This example | shows 3:25. |
2. Touch Number Pads for the correct time of day.
The Clock IS set when the CLOCK SETSignal
Light goes off
3. Touch START. | The Display will flash on and off if you have |
touched in an incorrect time such as 12:65 |
Using the minute timer
TheMlnute~merdoesnotstartorstopcooking;itworksIikeakitchentimer.Setin
minutesorsecondsandyouwill heara beepwhenthesettime isup.Theovendoor must be closed before setting the Minute Timer.
DO THIS...
Eli!
1. Touch MINUTE TIMER.
qmm
2.Touch Number Pads for minutes and seconds.
THIS HAPPENS...
The MINUTE TIMER Signal Light WIII come on and the Display will show a “0” Within 5 seconds start touching number pads for the desired time
The Display will show what numbers you touched in the order you touched them. This example shows 1 minute, 45 seconds.
The MINUTE TIMER Signal Light WIII stay on to show that the Minute Timer IS running
m
3. Touch START.
count down
The Display counts down the seconds to show how much time IS left on the Minute Timer
P
gEE
When the set time IS up, you will hear a long beep and the Display will show the time of day