Whirlpool MH3184XPS5 installation instructions Microwave Hood Combination Safety

Page 1

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See “Installation Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration in these installation instructions.

TableofContents

 

MICROWAVE HOOD COMBINATION SAFETY

..............................1

INSTALLATION REQUIREMENTS

2

Tools and Parts

2

Remove Cardboard Template

2

Location Requirements

2

Product Dimensions

3

Electrical Requirements

3

INSTALLATION INSTRUCTIONS

4

Remove Mounting Plate

4

Rotate Blower Motor

4

Locate Wall Stud(s)

6

Mark Rear Wall

7

Drill Holes in Rear Wall

7

Attach Mounting Plate to Wall

8

Prepare Upper Cabinet

8

Install Damper Assembly

9

Install the Microwave Oven

9

Complete Installation

10

VENTING DESIGN SPECIFICATIONS

11

ASSISTANCE

12

Replacement Parts

12

Accessories

12

MICROWAVE HOOD COMBINATION SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

WARNING

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

W10217687A

Image 1
Contents Microwave Hood Combination Safety Microwave Hood Combination Installation InstructionsToolsandParts Installation RequirementsRemoveCardboardTemplate LocationRequirementsInstallation Dimensions ProductDimensionsElectricalRequirements RequiredWall Venting Installation Only Installation InstructionsRemoveMountingPlate RotateBlowerMotorCD E Roof Venting Installation OnlyLocateWallStuds Possible Wall Stud ConfigurationsNo Wall Studs at End Holes Wall Stud at One End Hole Wall Studs at Both End HolesMarkRearWall Installation for No Wall Studs at End Holes Figures 1DrillHolesinRearWall PrepareUpperCabinet AttachMountingPlatetoWallInstalltheMicrowaveOven InstallDamperAssemblyCompleteInstallation For optimal venting installation, we recommend Venting Design SpecificationsRectangular to Round Transition Recommended Standard FittingsAccessories ReplacementPartsAssistance ¹⁄₄ x 10 8.3 x 25.4 cm vent system = 73 ft 22.2 m total