6.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or “down*
(V)pad(s) until the correct time shows in the display.
This example shows a desired stop time of
230.This provides a cook time of 30 minutes (the drfference between the start and slop times).
NOTE: If you do not set a stop time, the colon will flash in the display and STOP and COOK will flash atternatety to remind you to program a stop time or a cook time. (See page 18 for instructions on how to set delay start and stop automaticalty using Cook Time and Start Time.)
7.Push the StarVEnter pad. DELAY and BAKE will light UD in the display to show that the oven is programmed to start at a later time.
NOTE: The display will show ‘doof and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast.
You can change the temperature or time settings any time after pushing the StarVEnter pad by repeating just Steps 2 through 6.
8.When the start time is reached, a one- second tone will sound and DELAY will go off. The display will show the set cook time. ‘eon’, HEAT, TIMED and BAKE will light up in the display tc show that the oven is heating. The display will count down the baking/roasting time in minutes.
9.When the baking/roasting time is corn pleted, the oven will turn off automatically, beep four times and “End” will show in the display. You will also hear four
NOTE: To disable reminder tones, push and hokf the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.
To cancel the MEALTIMER” control setting:
l Push the Off/Cancel pad to return the display to the time of day.