GETTING TO KNOW YOUR MICROWAVE OVEN
Setting the clock
When your microwave oven is first plugged in, or after a power failure, the display will show “ : ”. If a time of day is not set, “ : ” will stay on the display until you set the clock or another function.
NOTES:
•You can only set the clock when the oven is not in use.
•If you enter an incorrect time, three tones will sound, “Err,” then “0” will appear on the display.
•If you touch OFF/CANCEL while setting the clock, the clock will return to the time already on the display.
Using the minute timer
Your microwave oven can be used as a kitchen timer. Use the minute timer for timing up to 99 minutes, 99 seconds.
1. Touch “0.”
TOUCH
2.Enter the time to be counted down.
To set time: | TOUCH |
1. Choose the setting.
TOUCH
Example for 3 minutes
2. Enter the time of day.
Example for 5:30:
TOUCH
3.Touch CLOCK/SET or
START/ENTER.
3. Start the countdown.
NOTE: At any time touch OFF/CANCEL to cancel the minute timer.
TOUCH
At end of timer cycle:
Five tones will sound and the display will show “End”.
Two tones will sound every minute until you open the door or touch OFF/CANCEL. The display will then return to the time of day.
NOTES:
•The minute timer can be used to set delayed start time by following steps 1 and 2 above, then set cook time as described in the “Cooking with more than one cycle” section.
•You cannot set the minute timer while using the oven.
12