BREAD/PIZZA FUNCTION SELECTION
Turn the “Functions” knob indicator to the symbol 
to access a submenu containing two automatic cooking functions for “bread” and “pizza”.
Bread
1.Turn the “Functions” knob to symbol 
: the display shows “BREAD” and AUTO at the side.
2.Press 3 to select the function.
3.Turn the “Browse” knob to set the required temperature (between 180°C and 220°C) and confirm with button 3 .
4.Turn the “Browse” knob to set the required cooking duration and press 3 to start cooking.
Pizza
1.Turn the Functions knob to symbol 
: the display shows “BREAD”. To select the “PIZZA” function, proceed as follows:
2.Turn the “Browse” knob: “PIZZA” appears on the display.
3.Press 3 to select the function.
4.Turn the “Browse” knob to set the required temperature (between 220°C and 250°C) and confirm with button 3 .
5.Turn the “Browse” knob to set the required cooking duration and press 3 to start cooking.
SETTINGS
Turn the “Functions” knob indicator to the symbol 
to access a submenu containing five display settings which can be changed.
Language
1.Turn the “Browse” knob to display “LANGUAGE”.
2.Press 3 to access the setting.
3.Turn the “Browse” knob to select the desired language and confirm by pressing button 3 .
Clock
Turn the “Browse” knob to display CLOCK. To change the time, see the previous section (SETTING THE CURRENT TIME).
Eco
With the ECO mode selected (ON), the display reduces the brightness, showing the clock when the oven is on standby position from 3 minutes. Also, the oven light is switched off during cooking. To view information on the display and switch the light on again, just press the button 3 or turn one of the knobs.
1.Turn the “Browse” knob to display “ECO.
2.Press 3 to access the setting (ON/OFF).
3.Turn the “Browse” knob to select the desired setting and confirm by pressing button 3 .
4.During a cooking function, if the Eco Mode is activated, the cavity lamp will be switched off after 1 minute of cooking and reactivated for each user interaction.
Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1.Turn the “Browse” knob to display “SOUND.
2.Press 3 to access the setting (ON/OFF).
3.Turn the “Browse” knob to select the desired setting and confirm by pressing button 3 .
Brightness
To change the display brightness, proceed as follows:
1.Turn the “Browse” knob to display “BRIGHTNESS.
2.Press button 3 : number 1 appears on the display.
3.Turn the “Browse” knob to increase or decrease brightness and confirm by pressing 3 .
EN12