Broan GSVH1K, GSFH1K, GSHH3K, GSEH3K user manual Controls, Boost

2. CONTROLS

2.1MAIN SWITCH

All units are equipped with a 3-position main switch, located on the front panel. The unit is intented for use with a wall controller (provided, see below). The main switch is to remain in either the “OFF” or “Normal/Remote” modes ONLY.The “Normal/Remote” mode allows the homeowner to operate the product from the wall controller (supplied with the unit), typically mounted near a thermostat or other convenient location.

OFF:

UNIT IS OFF AND

DOOR IS

UNLOCKED.

	NORMAL/REMOTE:
	UNIT IS OPERATING ON
	LOW SPEED. THIS IS THE
	CORRECT POSITION
	WHEN THE WALL
	CONTROLLER IS USED.
		BOOST:
		UNIT IS OPERATING
VC0053		ON HIGH SPEED.

2.2OPERATING ACCGSC1 CONTROLLER

2.2.1ACCGSC1 CONTROLLER DESCRIPTION

POWER INDICATOR:		HIGH:
LIGHTS UP WHEN SLIDE
SWITCH IS IN THE HIGH OR		UNIT IS OPERATING AT
LOW POSITION.		ITS HIGH SPEED.
	Power
FILTER MAINTENANCE	High	Low:
INDICATOR:
	Low	UNIT IS OPERATING AT
FLASHES EVERY MINUTE TO
		ITS LOW SPEED.
INDICATE IT IS ON DUTY.	OFF
	Filter Maintenance
FLASHES EVERY SECOND
	Reset Filter
WHEN IT IS TIME TO		OFF:
REPLACE PREFILTER.		UNIT IS OFF.
LED STAYS LIT WHEN IT IS	VC0059
TIME TO REPLACE FILTER		RESET FILTER HOLE:
AND PREFILTER.
	ONCE THE MAINTENANCE DONE, RESET THE FILTER
	MAINTENANCE INDICATOR BY CAREFULLY INSERTING A SMALL
	ROD (E.G.: PAPER CLIP) IN THE RESET FILTER HOLE,
	FOR 1 SECOND. THE FILTER MAINTENANCE INDICATOR
	WILL TURN OFF. REFER TO THE FILTER MAINTENANCE
	RECOMMENDATIONS IN SECTION 3.

2.2.2USING ACCGSC1 CONTROLLER

•OFF: To stop the unit, slide the button on this position.

•LOW: For a day-to-day usage, slide the button on this position. The unit then will operate on low speed, providing 70 cfm.

•HIGH: For a high speed operation, slide the button on this position. Generally used when more ventilation is required, such as parties, smokers, or for a 6-bedroom house. This mode provides 105 cfm.

- 5 -