Broan EW5836SS Install the Hood Ducted Hoods Only, Round Steel Duct Duct Length Decorative Flue

Page 4

MODELS EW5830SS • EW5836SS

INSTALL THE HOOD (Ducted Hoods Only)

Ceiling

Center of

 

installation

 

 

 

 

C

 

 

L

Flush with

 

Upper flue mounting

 

the ceiling

 

bracket slots

 

 

1.Center the flue mounting bracket over the hood location and flush with the ceiling. Secure the upper flue bracket to the wall using (2) 4mm x 38mm mounting screws. Note: Drywall anchors may be required (not included).

2.Tighten the screws completely. Make sure that the bracket is tight against the wall and ceiling.

3.Remove the protective plastic film covering the decorative flue and the hood at this time.

4.Remove the grease filters by pulling down the metal latch tab and tilting filters downward to remove.

5.Align the two outer keyhole slots on the hood with the mounting screws that were partially tightened into the wall framing. Ensure that hood is seated entirely on mounting screws and that hood is level.Then tighten screws completely.

Page 4

6.Install (2) 4mm x 38mm long screws into the holes inside the hood and tighten them securely.

7.Reinstall grease filters by aligning rear filter tabs with slots in the hood. Pull down the metal latch tab, push filters into position and release. Make sure filters are securely engaged after installation.

6” ROUND

STEEL DUCT

DUCT LENGTH

DECORATIVE

FLUE

8.Measure and install steel ductwork to hood duct connector and ductwork rough-in on ceiling or wall. Use duct tape to make all joints secure and air tight.

9.Plug power cord into wall outlet.

Image 4
Contents Read and Save These Instructions To Reduce the Risk of a Range TOP Grease FireInstall the Ductwork Ducted Hoods Only Measure the InstallationPrepare the Hood Install the Wiring Install the Hood Mounting SupportSee Chart Below High Cooktop HereInstall the Hood Ducted Hoods Only Round Steel Duct Duct Length Decorative FlueInstall the Hood Non-Ducted Hoods Only NON-DUCT KIT Model RKE58 ContentsModels EW5830SS EW5836SS Operation Cleaning & Maintenance Light BulbsCUP Tool PushService Parts WarrantyLire CES Directives ET LES Conserver Mesures DE L’INSTALLATION Installation DES Conduits hottes avec conduits seulementPréparation DE LA Hotte RemarqueInstructions DE Mise À LA Terre VIS DEConduit Rond Installation DE LA Hotte hottes avec conduits seulementLongueur DU Conduit Décoratif Installation DE LA Hotte hotte sans conduits seulement RemarqueCaisson NON CanaliséConduit Rond DE Métal Longueur DU ConduitFonctionnement Ampoules Nettoyage ET EntretienAvertissement Garantie Pièces DE RechangeDE N DE Pièce Description QTÉ Repère LEA Y Conserve Estas Instrucciones Mida LA Instalación Prepare LA CampanaInstale LOS Conductos Sólo en campanas con conductosInstale EL Soporte DE Montaje DE LA Campana Instale EL CableadoInstrucciones Para LA Puesta a Tierra Conducto Redondo DE Acero DE Instale LA CampanaLongitud DEL Conducto Tubo DE Humos Decorativo Contenido DEL KIT Para Sistemas SIN Conductos Modelo RKE58 Precaución Funcionamiento Indicación DE Cambio DE FiltroSistema Heat Sentry Regulador DE Aire DE RepuestoBombillas Limpieza Y MantenimientoAdvertencia Clave GarantíaDescripción Cdad Models / Modèles / Modelos EW5830SS EW5836SS

EW5830SS, EW5836SS specifications

The Broan EW5836SS and EW5830SS range hoods are premium kitchen ventilation solutions designed to enhance both functionality and aesthetic in modern kitchens. With their striking design and powerful performance, they cater to the needs of home chefs and those who prioritize air quality in their cooking environment.

One of the standout features of both models is their sleek, stainless steel construction. This not only ensures durability and easy maintenance, but also adds a touch of elegance to any kitchen decor. The modern aesthetic is complemented by a straightforward design, making them suitable for various kitchen styles.

Both the EW5836SS and EW5830SS are equipped with a powerful internal blower that efficiently removes smoke, steam, and odors from the kitchen. With multiple airflow settings, users can adjust the ventilation power according to the cooking task at hand. This flexibility allows for effective air management, ensuring the kitchen remains fresh and inviting during meal preparation.

Another notable aspect of these range hoods is their quiet operation. The advanced sound-dampening technology minimizes noise levels, allowing for a more pleasant cooking experience. Even at higher speed settings, the sound produced remains unobtrusive, making it easier to converse with family or enjoy music while cooking.

The Broan EW5836SS and EW5830SS also feature integrated LED lighting, which provides bright illumination over the cooking surface. This not only enhances visibility during meal preparation but also contributes to energy efficiency, as LED lights consume less power compared to traditional bulbs.

Installation flexibility is another benefit of these range hoods. Both models can be easily installed as either ducted or non-ducted options, depending on the kitchen layout and ventilation requirements. This versatility makes them suitable for a variety of home configurations, accommodating different needs and preferences.

Additionally, the Broan EW5836SS and EW5830SS come with dishwasher-safe aluminum filters that capture grease and other airborne particles. This feature ensures that the range hood operates effectively while making maintenance hassle-free for users.

In summary, the Broan EW5836SS and EW5830SS range hoods combine style, power, and efficiency into one robust solution for modern kitchens. With their durable construction, quiet operation, integrated lighting, and flexible installation options, they stand out as exceptional choices for enhancing kitchen ventilation and overall cooking experience.