Mounting your extractor

9.Assemble the ventilation duct(H), as shown in the diagrams below dependanyt on whether you are extracting air to the outside (Fig 12) or re-circulating (Fig 13), in which case you will need to purchase an optional accessory T-piece(M) from CDA. Ensure that the duct adapter (F) is securely connected to the duct pipe or T-piece in order to minimise noise.

10.Separate the two decorative sections and mount the upper section(Y) into position, then fix it to the frame with the 2 supplied screws(X).

11.Carefully slide the lower section (L) over the upper section (Y) and secure into position using the 4 machine screws (A) as shown in Fig 15.

Fig. 14

Fig. 12

Fig. 13

Fig. 15