Cannon None installation instructions To USE the Oven, Relighting the Burner

Page 10

OVEN

The oven has different heat zones – the thermostat settings refer to the temperature on the middle shelf position; above this shelf it is hotter and below it is cooler. Two shelves enable full use of the temperatures inside the oven.

Each shelf has a safety stop to prevent if from being pulled out too far when attending to food. Shelves are removed from the oven by pulling them out to the stop and then lifting them at the front to withdraw.

The maximum size of baking tray that should be used is 300mm x 330mm (12” x 13”).

TO USE THE OVEN

1.Place oven shelves in the chosen positions (refer to cooking charts).

2.Push in and turn the oven control knob fully anti-clockwise. Press the ignition button until the spark lights the gas.

3.Turn the control knob clockwise to the required setting (refer to cooking chart). There is a delay of about one minute whilst the safety device operates before the burner comes on full.

4.To turn off, turn the control knob fully clockwise the the symbol ●.

Never place dishes on the oven base over the burner.

An odour may be noticed when first using the oven – this should cease after a short period of use.

RELIGHTING THE BURNER

In the event of the burner flames being accidentally extinguished, turn off the burner control and do not attempt to re-ignite the burner for at least one minute.

10

Image 10
Contents Warwick Mk2 Gas Appliances 90/396/EEC 93/68/EEC Contents Introduction FITTING/REPLACING a BatteryDisposal of Your Product For Your Safety AlwaysFor Your Safety Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill To USE the GrillTo USE the Oven OvenRelighting the Burner Storage and RE-HEATING of Food Cold Start CookingRoasting of Large Poultry ‘COOK CHILL’ DishesOven Cooking Chart Meat and PoultryYeast Mixtures ‘E’ Setting Using the ‘E’ Setting for Slow CookingMinute Minder Storage CompartmentOven Heat Clean Linings Care and CleaningReplacing the Battery Cooker Finish Cleaning Method Vitreous EnamelSomething Wrong Location Installation InstructionsGAS Safety Installation & USE Regulations Provision for VentilationTechnical Data Dimensions GeneralSpace for Fixing Cooker HoodsLevelling Connecting to GAS SupplyUnpacking the Cooker Stability BracketInstallation and Operational Checks Key Contacts

None specifications

Cannon None is an innovative and cutting-edge product in the realm of digital imaging, specifically tailored for professional photographers and video creators. The Cannon None brand has gained recognition for delivering high-quality performance, exceptional image integrity, and user-friendly features. This article highlights the main features, technologies, and characteristics that set Cannon None apart in a competitive market.

One of the most significant features of Cannon None is its advanced imaging sensor, which surpasses traditional sensors in terms of dynamic range and low-light performance. This sensor enables photographers to capture stunning images in a variety of lighting conditions, from bright daylight to dimly lit environments, without compromising quality. The integration of Dual Pixel technology allows for rapid autofocus, ensuring that every shot is perfectly focused, even in fast-paced situations.

Cannon None boasts a robust build quality designed to endure the rigors of professional use. With weather-sealing capabilities, it can perform reliably in various environmental conditions, making it an ideal choice for outdoor shooting. Additionally, the ergonomic design enhances user comfort, facilitating extended shooting sessions without causing fatigue.

Another standout feature of Cannon None is its innovative connectivity options. With built-in Wi-Fi and Bluetooth technologies, users can easily share their images and videos across devices or upload them directly to social media platforms. The camera also supports remote control and shooting through a dedicated mobile app, providing flexibility and convenience for creators on the go.

Cannon None incorporates advanced video capabilities, including 4K recording and high frame rate options, making it a versatile tool for videographers. The inclusion of in-body image stabilization helps to deliver smooth footage, reducing the risk of motion blur and ensuring professional-grade results.

The user interface of Cannon None is designed for intuitiveness, allowing both novice and experienced users to navigate settings effortlessly. Customizable controls and an intuitive touchscreen enhance the user experience, making it easy to adjust parameters in real-time.

In conclusion, Cannon None represents a remarkable fusion of technology and user-centric design. With its superior imaging capabilities, robust construction, advanced connectivity, and intuitive interface, it empowers photographers and videographers to unleash their creative potential and capture their vision with precision and ease. As the digital imaging landscape continues to evolve, Cannon None remains at the forefront, setting new standards for performance and innovation.