Cannon None installation instructions Using the ‘E’ Setting for Slow Cooking

Page 14

THE ‘E’ SETTING

The ‘E’ setting on the oven thermostat is used for slow cooking, keeping food warm and warming plates for short periods.

USING THE ‘E’ SETTING FOR SLOW COOKING

1.All dishes cooked by the ‘E’ setting should be cooked for a minimum 6 hours. They will ‘hold’ at this setting for a further hour but marked deterioration in appearance will be noticed in some cases.

2.Joints of meat and poultry should be cooked at Mk. 6 for 30 minutes before turning to the ‘E’ setting and never be cooked lower than the middle shelf position.

3.Joints of meat over 6 lbs (2.7kg) and poultry over 4 lbs 8oz (2 kg) should not be cooked using the ‘E’ setting.

4.Always stand covered joints on a rack over the meat tin to allow good air circulation.

5.Pork joints and poultry must be checked for an internal temperature of at least 88oC.

6.This method is unsuitable for stuffed meat and stuffed poultry.

7.Always bring soups, casseroles and liquids to the boil before putting in the oven.

8.Cover casseroles with foil and then the lid to prevent loss of moisture.

9.Always thaw frozen food completely before cooking.

10.Root vegetables will cook better if cut into small pieces.

11.Adjust seasonings and thickenings at the end of the cooking time.

12.Use the zones of heat in the oven, e.g. meringues and milk puddings can be cooked lower in the oven whilst other dishes requiring greater heat can be cooked above them.

13.Egg and fish dishes need only 1-5 hours cooking and should be included in day cooking sessions, when they can be observed from time to time.

14.Dried red kidney beans must be boiled for a minimum of ten minutes after soaking, before inclusion in any dish.

14

Image 14
Contents Warwick Mk2 Gas Appliances 90/396/EEC 93/68/EEC Contents Disposal of Your Product FITTING/REPLACING a BatteryIntroduction For Your Safety AlwaysFor Your Safety Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill To USE the GrillRelighting the Burner OvenTo USE the Oven Storage and RE-HEATING of Food Cold Start CookingRoasting of Large Poultry ‘COOK CHILL’ DishesOven Cooking Chart Meat and PoultryYeast Mixtures ‘E’ Setting Using the ‘E’ Setting for Slow CookingMinute Minder Storage CompartmentReplacing the Battery Care and CleaningOven Heat Clean Linings Cooker Finish Cleaning Method Vitreous EnamelSomething Wrong Location Installation InstructionsGAS Safety Installation & USE Regulations Provision for VentilationTechnical Data Dimensions GeneralSpace for Fixing Cooker HoodsLevelling Connecting to GAS SupplyUnpacking the Cooker Stability BracketInstallation and Operational Checks Key Contacts

None specifications

Cannon None is an innovative and cutting-edge product in the realm of digital imaging, specifically tailored for professional photographers and video creators. The Cannon None brand has gained recognition for delivering high-quality performance, exceptional image integrity, and user-friendly features. This article highlights the main features, technologies, and characteristics that set Cannon None apart in a competitive market.

One of the most significant features of Cannon None is its advanced imaging sensor, which surpasses traditional sensors in terms of dynamic range and low-light performance. This sensor enables photographers to capture stunning images in a variety of lighting conditions, from bright daylight to dimly lit environments, without compromising quality. The integration of Dual Pixel technology allows for rapid autofocus, ensuring that every shot is perfectly focused, even in fast-paced situations.

Cannon None boasts a robust build quality designed to endure the rigors of professional use. With weather-sealing capabilities, it can perform reliably in various environmental conditions, making it an ideal choice for outdoor shooting. Additionally, the ergonomic design enhances user comfort, facilitating extended shooting sessions without causing fatigue.

Another standout feature of Cannon None is its innovative connectivity options. With built-in Wi-Fi and Bluetooth technologies, users can easily share their images and videos across devices or upload them directly to social media platforms. The camera also supports remote control and shooting through a dedicated mobile app, providing flexibility and convenience for creators on the go.

Cannon None incorporates advanced video capabilities, including 4K recording and high frame rate options, making it a versatile tool for videographers. The inclusion of in-body image stabilization helps to deliver smooth footage, reducing the risk of motion blur and ensuring professional-grade results.

The user interface of Cannon None is designed for intuitiveness, allowing both novice and experienced users to navigate settings effortlessly. Customizable controls and an intuitive touchscreen enhance the user experience, making it easy to adjust parameters in real-time.

In conclusion, Cannon None represents a remarkable fusion of technology and user-centric design. With its superior imaging capabilities, robust construction, advanced connectivity, and intuitive interface, it empowers photographers and videographers to unleash their creative potential and capture their vision with precision and ease. As the digital imaging landscape continues to evolve, Cannon None remains at the forefront, setting new standards for performance and innovation.