Cannon None Care and Cleaning, Oven Heat Clean Linings, Replacing the Battery

Page 16

CARE AND CLEANING

Clean the cooker regularly and wipe up spills soon after they occur to prevent them from becoming burnt on. Never use biological washing

powder, caustic cleaners, harsh abrasives, scouring pads, aerosol cleaners or oven chemical cleaners of any kind.

To move the cooker forward, open the door and with both hands positioned under the roof of the compartment, lift and pull forward. Replace by pushing the cooker back- wards. Check that the cooker is level. Take care to ensure that any floor covering is not damaged.

OVEN HEAT CLEAN LININGS

The oven roof and side linings are coated with a special enamel which has a continu- ous cleaning action. The higher the oven temperature the more effective the action. In most cases this cleaning operation will proceed during normal cooking. However, if roasting is done frequently, or high temperatures are not used regularly, it may be nec- essary to run the oven empty at Mark 8 for about two hours.

If desirable, they can be wiped with a cloth wrung out in hot soapy water followed by a clean damp cloth.

REPLACING THE BATTERY

The battery is not covered by the guarantee. Use an alkaline AA battery. The battery holder is located in the top front right corner of the storage compartment. Withdraw the storage drawer. Insert/replace with the end marked + facing towards the back of the compartment.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Warwick Mk2 Gas Appliances 90/396/EEC 93/68/EEC Contents Introduction FITTING/REPLACING a BatteryDisposal of Your Product For Your Safety AlwaysFor Your Safety Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill To USE the GrillTo USE the Oven OvenRelighting the Burner Cold Start Cooking Roasting of Large PoultryStorage and RE-HEATING of Food ‘COOK CHILL’ DishesOven Cooking Chart Meat and PoultryYeast Mixtures ‘E’ Setting Using the ‘E’ Setting for Slow CookingMinute Minder Storage CompartmentOven Heat Clean Linings Care and CleaningReplacing the Battery Cooker Finish Cleaning Method Vitreous EnamelSomething Wrong Installation Instructions GAS Safety Installation & USE RegulationsLocation Provision for VentilationTechnical Data Dimensions GeneralSpace for Fixing Cooker HoodsConnecting to GAS Supply Unpacking the CookerLevelling Stability BracketInstallation and Operational Checks Key Contacts

None specifications

Cannon None is an innovative and cutting-edge product in the realm of digital imaging, specifically tailored for professional photographers and video creators. The Cannon None brand has gained recognition for delivering high-quality performance, exceptional image integrity, and user-friendly features. This article highlights the main features, technologies, and characteristics that set Cannon None apart in a competitive market.

One of the most significant features of Cannon None is its advanced imaging sensor, which surpasses traditional sensors in terms of dynamic range and low-light performance. This sensor enables photographers to capture stunning images in a variety of lighting conditions, from bright daylight to dimly lit environments, without compromising quality. The integration of Dual Pixel technology allows for rapid autofocus, ensuring that every shot is perfectly focused, even in fast-paced situations.

Cannon None boasts a robust build quality designed to endure the rigors of professional use. With weather-sealing capabilities, it can perform reliably in various environmental conditions, making it an ideal choice for outdoor shooting. Additionally, the ergonomic design enhances user comfort, facilitating extended shooting sessions without causing fatigue.

Another standout feature of Cannon None is its innovative connectivity options. With built-in Wi-Fi and Bluetooth technologies, users can easily share their images and videos across devices or upload them directly to social media platforms. The camera also supports remote control and shooting through a dedicated mobile app, providing flexibility and convenience for creators on the go.

Cannon None incorporates advanced video capabilities, including 4K recording and high frame rate options, making it a versatile tool for videographers. The inclusion of in-body image stabilization helps to deliver smooth footage, reducing the risk of motion blur and ensuring professional-grade results.

The user interface of Cannon None is designed for intuitiveness, allowing both novice and experienced users to navigate settings effortlessly. Customizable controls and an intuitive touchscreen enhance the user experience, making it easy to adjust parameters in real-time.

In conclusion, Cannon None represents a remarkable fusion of technology and user-centric design. With its superior imaging capabilities, robust construction, advanced connectivity, and intuitive interface, it empowers photographers and videographers to unleash their creative potential and capture their vision with precision and ease. As the digital imaging landscape continues to evolve, Cannon None remains at the forefront, setting new standards for performance and innovation.
Top Page Image Contents