Cannon 10426G Installation Instructions, GAS Safety Installation & USE Regulations, Location

Page 28

INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the data badge which is fitted on the back panel.

This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. particular attention should be given to the relevant requirements regarding ventilation.

MODEL NUMBERS 10420G, 10426G, 10427G, 10670G, 10672G, 10675G, 10678G Category I2H (GB. IE)

These models are set to burn NATURAL GAS (G20) at 20 mbar ONLY and can not be used on any other gas.

MODEL NUMBERS 10673G, 10676G, 10679G

Category I3+ (GB. IE)

These models are set to burn PROPANE GAS (G31) at 37 mbar and BUTANE GAS (G30) at 28-30 mbar

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172.

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed-sitting room of less than 20m3.

LPG Models shall not be installed in a room or internal space below ground level, e.g. in a basement.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440: Part 2.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2 should be consulted to determine air vent requirements.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Chichester Contents Introduction For Your Safety AlwaysFor Your Safety Automatic Cooking Oven Timer OperationGuidance on Automatic Cooking Clockface Setting the Time of DAY Auto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill Grill PAN and HandleTo USE the Grill Relighting the BurnerShelf Position Food Main Oven To USE the Main OvenCold Start Cooking Roasting of Large PoultryStorage and RE-HEATING of Food ‘COOK CHILL’ DishesMain Oven Cooking Chart Meat and PoultryYeast Mixtures ‘SLOW COOK’ Setting Using the ‘SLOW COOK’ Setting for Slow CookingTOP Oven Guidance on Using the TOP OvenTo USE the TOP Oven TOP Oven Cooking Chart Gas Shelf Food Mark Main Oven Heat Clean Linings Care and CleaningReplacement of Oven Light Bulb Cooker Finish Cleaning Method Vitreous EnamelProblem Check Something Wrong With Your CookerSomething Wrong Installation Instructions GAS Safety Installation & USE RegulationsLocation Provision for VentilationGeneral Technical Data DimensionsNatural GAS LPG Models Space for Fixing Cooker HoodsLevelling Unpacking the CookerStability Bracket Connecting to GAS Supply Electrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Page Key Contacts

10420G, 10426G, 10427G, 10679G, 10676G specifications

Cannon Traditional series represents a fine blend of innovative technology and classic design, especially highlighted in the models 600, 10673G, 10678G, 10427G, and 10679G. Each of these models carries the legacy of Cannon's commitment to quality, performance, and usability.

The Cannon Traditional 600 stands out with its robust construction and user-friendly features. It is designed for anglers who value durability and reliability. This model typically incorporates a high-performance reel, ensuring smooth casting and retrieval. The 600 is ideal for both beginners and seasoned fishers looking for a dependable option.

Moving on to Cannon Traditional 10673G, this model elevates the fishing experience with advanced features. One of its main attractions is the integrated depth control system, allowing users to easily adjust and maintain their desired fishing depth. This capability significantly enhances the likelihood of successful catches, as it ensures the bait is presented effectively in the aquatic environment. The 10673G also emphasizes a lightweight design, making it easy to transport and handle over extended fishing sessions.

The Cannon Traditional 10678G is another remarkable model in this series, showcasing state-of-the-art materials that provide enhanced resistance to corrosion. This feature is particularly beneficial for saltwater environments, as it ensures longevity and performance under challenging conditions. The 10678G is equipped with intuitive controls and features a digital display that offers real-time information on fishing depth and line status, making it a highly sought-after model among serious anglers.

In contrast, the Cannon Traditional 10427G combines traditional aesthetics with modern functionality. Its sleek design is not only visually appealing but also optimized for ease of use. It features an effective sonar integration that allows users to visualize underwater structures and fish locations, significantly improving the chances of a successful outing. Additionally, the 10427G is built for versatility, accommodating various fishing techniques.

Lastly, the Cannon Traditional 10679G is designed to cater to the needs of both fresh and saltwater anglers. Its advanced fish-finding technology coupled with precise depth-setting capabilities allows for versatile fishing applications. This model also integrates energy-efficient components, providing longer battery life during outdoor adventures.

In conclusion, the Cannon Traditional series, with models 600, 10673G, 10678G, 10427G, and 10679G, offers a comprehensive range of features that enhance the fishing experience. Anglers across various skill levels can benefit from the advanced technologies integrated within these models, ensuring every fishing trip is enjoyable and productive. With a focus on user convenience and performance, Cannon continues to be a preferred choice for fishing enthusiasts worldwide.
Top Page Image Contents