Cannon 10678G, Traditional 600 Electrical Connection, Connect to a 230-240V A.C. Supply only

Page 33

ELECTRICAL CONNECTION

WARNING – THIS APPLIANCE MUST BE EARTHED.

CONNECT TO A 230-240V A.C. SUPPLY ONLY.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to but not directly above, and not more than 1.25m away from the appliance and capable of electrical isolation.

The mains lead should be routed such that it cannot touch hot parts of the cooker i.e. the back panel above a height of 650mm from the floor.

Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

NOTE: The removed plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket – with the obvious consequent danger.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below to a three pin plug of not less than 13 amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a 3 amp fuse which is approved to B.S. 1362.

IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in

accordance with the following code:

GREEN AND YELLOW

– EARTH

 

Blue to

 

 

Neutral

 

BLUE

– NEUTRAL

 

 

 

 

 

 

 

 

BROWN

– LIVE

 

 

 

 

 

Cord Clamp

Green &

Yellow to

Earth

Brown to Live

3 Amp

Fuse

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:– The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with

the letter E or by the earth symbol or coloured green or green and yellow. The wire which is coloured blue must be connected to the terminal which is marked with the N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. As the appliance must be earthed, do not use 2-pin sockets outlets, if you are in doubt, consult a qualified electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size i.e. 0.75mm2 cross sectional area and temperature rating of 85˚ C e.g. heat resisting PVC, available from our parts department (see Back Cover).

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied a 3 amp ASTA approved fuse to BS1362 must be fitted.

NOTE: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electricity Board. The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug.

Make sure that the cable does not become trapped when pushing the cooker into position.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Chichester Contents Introduction Always For Your SafetyFor Your Safety Oven Timer Operation Automatic CookingGuidance on Automatic Cooking Clockface Setting the Time of DAY Auto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGrill PAN and Handle GrillTo USE the Grill Relighting the BurnerShelf Position Food To USE the Main Oven Main OvenRoasting of Large Poultry Cold Start CookingStorage and RE-HEATING of Food ‘COOK CHILL’ DishesMeat and Poultry Main Oven Cooking ChartYeast Mixtures Using the ‘SLOW COOK’ Setting for Slow Cooking ‘SLOW COOK’ SettingGuidance on Using the TOP Oven TOP OvenTo USE the TOP Oven TOP Oven Cooking Chart Gas Shelf Food Mark Care and Cleaning Main Oven Heat Clean LiningsReplacement of Oven Light Bulb Vitreous Enamel Cooker Finish Cleaning MethodSomething Wrong With Your Cooker Problem CheckSomething Wrong GAS Safety Installation & USE Regulations Installation InstructionsLocation Provision for VentilationTechnical Data Dimensions GeneralNatural GAS LPG Models Cooker Hoods Space for FixingUnpacking the Cooker LevellingStability Bracket Connecting to GAS Supply Connect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Page Key Contacts

10420G, 10426G, 10427G, 10679G, 10676G specifications

Cannon Traditional series represents a fine blend of innovative technology and classic design, especially highlighted in the models 600, 10673G, 10678G, 10427G, and 10679G. Each of these models carries the legacy of Cannon's commitment to quality, performance, and usability.

The Cannon Traditional 600 stands out with its robust construction and user-friendly features. It is designed for anglers who value durability and reliability. This model typically incorporates a high-performance reel, ensuring smooth casting and retrieval. The 600 is ideal for both beginners and seasoned fishers looking for a dependable option.

Moving on to Cannon Traditional 10673G, this model elevates the fishing experience with advanced features. One of its main attractions is the integrated depth control system, allowing users to easily adjust and maintain their desired fishing depth. This capability significantly enhances the likelihood of successful catches, as it ensures the bait is presented effectively in the aquatic environment. The 10673G also emphasizes a lightweight design, making it easy to transport and handle over extended fishing sessions.

The Cannon Traditional 10678G is another remarkable model in this series, showcasing state-of-the-art materials that provide enhanced resistance to corrosion. This feature is particularly beneficial for saltwater environments, as it ensures longevity and performance under challenging conditions. The 10678G is equipped with intuitive controls and features a digital display that offers real-time information on fishing depth and line status, making it a highly sought-after model among serious anglers.

In contrast, the Cannon Traditional 10427G combines traditional aesthetics with modern functionality. Its sleek design is not only visually appealing but also optimized for ease of use. It features an effective sonar integration that allows users to visualize underwater structures and fish locations, significantly improving the chances of a successful outing. Additionally, the 10427G is built for versatility, accommodating various fishing techniques.

Lastly, the Cannon Traditional 10679G is designed to cater to the needs of both fresh and saltwater anglers. Its advanced fish-finding technology coupled with precise depth-setting capabilities allows for versatile fishing applications. This model also integrates energy-efficient components, providing longer battery life during outdoor adventures.

In conclusion, the Cannon Traditional series, with models 600, 10673G, 10678G, 10427G, and 10679G, offers a comprehensive range of features that enhance the fishing experience. Anglers across various skill levels can benefit from the advanced technologies integrated within these models, ensuring every fishing trip is enjoyable and productive. With a focus on user convenience and performance, Cannon continues to be a preferred choice for fishing enthusiasts worldwide.
Top Page Image Contents