Capresso S9, S7 14e. HOT CHOCOLATE, Cafe Mocha, 14f. Cleaning the Frothxpress Plus, Programming

•Now froth or steam as described in chapter 14c.

14e. HOT CHOCOLATE, CAFE MOCHA

For hot chocolate fill the milk container with the desired amount of chocolate syrup, add cold milk and stir well. Then proceed as described under "Frothing". Adding a shot or two of espresso makes it a Café Mocha.

14f. CLEANING THE FROTHXPRESS PLUS

•Remove the hose which connects the frothXpress Plus and the milk container.

•Store the milk container in the refrigerator.

•Remove the frothXpress from the steam nozzle.

•Drop the hose and the frothXpress in a cup with warm water. This will prevent the milk from hardening.

•Place a cup underneath the steam nozzle and push the PERMANENT steam button and let steam pass through for a second or two (see Fig. 4).

•Replace the frothXpress-PLUS system.

For a more thorough cleaning you can take the pieces apart. When attaching the chrome sleeve to the black nipple, angle it as shown above. Use a twisting back and forth motion and gently push the two pieces together.

14g. CLEANING THE MILK CONTAINER

•Remove the lid of the milk container. (The milk container is dishwasher safe; upper rack.)

•Clean the lid and the two metal hoses with warm water.

•Assemble as shown in Fig. 15.

15. PROGRAMMING

Before leaving our factory, many of the functions are set to enable you to obtain coffee without any additional programming (see chapter 6 “Factory Settings”). You can change a variety of parameters to produce coffee to your personal taste. The programming buttons (Fig. 3A) are located behind the cover for programming (Fig.1,19).

The following functions can be programmed:

■Amount of coffee (POWDER QUANTITY)

■Coffee temperature

■Cup size (WATER QUANTITY)

■Steam portion

■Amount of hot water (TEA PORTION)

■Claris filter cartridge

■Water hardness

■Economy mode

■Clock/time

■Auto turn-on

■Auto shut-off

■Supplies and cup counter (information only)

■Languages

18.