Capresso 13215, S7, S9, S8 warranty Cleaning Metal Contacts, Cleaning the Frother Systems

Page 24

16.7 CLEANING METAL CONTACTS

EMPTY TRAY/CLEAN CONTACTS

•Remove used water tray (Fig.1, 18).

•Clean the metal contacts (Fig. 20) with hot water and dish- washing liquid. Use a household brush if necessary.

•Replace water tray. COFFEE READY

16.8CLEANING THE FROTHER SYSTEMS

See chapters 14b, 14f and 14g.

16.9GENERAL CLEANING INSTRUCTIONS

Never use abrasive materials or chemicals to clean the machine.

• Clean the housing with a soft, damp cloth.

• Rinse water tank daily and fill with fresh cold water.

16.10EMPTYING THE SYSTEM BEFORE TRANSPORT

This procedure is necessary to prevent water and frost damage in case you intend to transport the machine.

COFFEE READY

• Remove the frother system. Leave the steam nozzle attached (Fig. 4).

• Place a container under the steam nozzle.

• Press the PERMANENT steam button (Fig. 3, M).

STEAM INTAKE

• Now remove the water tank. The machine will still release some steam. You will hear a knocking noise and the machine will stop after approx. 30 seconds.The display will show

PRESS STEAM/ FILL SYSTEM.

•Turn off the machine (Fig.2, B). You can now safely transport the machine.

•The next time you turn on the machine, proceed as described in chapter 7.

17. AUTOMATIC CLEANING CYCLES

17.1 CLEANING WITH SPECIAL TABLET

The machine monitors how many coffees are brewed and how often the rinsing program is activated. After approx. 200 coffees the display will show CLEAN UNIT. You can continue to make coffee, however we highly recommend that you clean the machine as described below within the next few days. This cleaning program will remove oil build-ups in the brewing chamber. If the display shows CLEAN NOW you should clean the machine immediately. There will also be a "beep".

This cleaning program takes about 15 minutes. Please use the enclosed white cleaning tablet. The machine comes with a pack of 2 tablets. To re-order see chapter 19.

Important: Once the cleaning program has started do not interrupt the procedure.

•Make sure the machine is on.

•Open the cover (Fig. 1,19) and push and hold the TABLET CLEANING button (Fig. 3A,S) until you hear a beep.

EMPTY TRAY (FILL WATER might also show).

•Make sure that the water container is at least half full.

•Remove and empty the tray and the used bean container and replace. Attention: Even if the tray and the bean container are already empty, you still need to remove

24.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Impressa S9, S8, S7 JURA-CAPRESSO FrothXpress-Plus System see , 15a Operating Display Steam System Permanent Steam Claris ButtonCoffee Ready status DecalcPage Frothing range Steam only no siphoning Page Table of Contents Product Registration Customer Service Welcome to the Impressa S7, S8, S9Word about Crema Coffee PLEASE, DON’T... or you void your warranty protection Pressure BrewingDifferent Coffee Drinks Coffee FactsFactory Settings Preparing the Machine for the First TimePLEASE, do Please Wait Fill System / Press SteamAdjusting the Grinder CUP Illumination7a. Adding Coffee Beans 7b. First Time GRINDING/BREWINGAdjusting for Water Hardness 11a. Installing the Claris CartridgeClaris Water Cartridge Press KEY / Powder Quantity11b. Programming the Claris Cartridge 11c. Replacing the Claris CartridgeMaking Espresso and Crema Coffee 12a. Using Ground Coffee Processing HOT WaterFrothing and Steaming Milk Unit Rinsing14a. Using the Dual Frother Plus 14b. Cleaning the Dual Frother PlusFrothing Hotter MilkSteaming 14f. Cleaning the Frothxpress Plus 14g. Cleaning the Milk Container14e. HOT CHOCOLATE, Cafe Mocha ProgrammingProgramming Coffee Temperature Programming Powder QuantityProgramming CUP Size Water Quantity Programming Steam Portion Programming HOT Water TEA PortionProgramming the Claris Cartridge See b Programming Economy Mode Programming TIMER/CLOCKProgramming Water Hardness Programming Auto TURN-ON TimeRE-INSTALL Factory Settings Care and Maintenance Fill WaterProgramming Auto SHUT-OFF Time CUP COUNTER, ETCEmptying the Used Water Tray Fill BeansStones and Beans Empty TrayCleaning Metal Contacts Cleaning the Frother SystemsGeneral Cleaning Instructions Automatic Cleaning Cycles Cleaning with Special TabletADD TABLET/ Press Cleaning DecalcifyingUnit Calc Empty Tray Agent in TankClean CONTACTS/ Empty Tray Tips for Perfect CoffeeUnit DECALC/PLEASE Wait Press CalcWarranty SuppliesAll these supplies are available through Other limitations and exclusionsTroubleshooting SolutionGrinder Makes AN Extremely Loud Noise no Beans are Ground

S8, S9, S7, 13215 specifications

The Capresso S9, S13215, S8, and S7 are sophisticated espresso machines that exemplify quality engineering and innovative technologies, making them a favorite among coffee enthusiasts and baristas alike. Each model offers a unique blend of features, ensuring optimal brewing experiences tailored to individual preferences.

The Capresso S9 model stands out with its robust construction and user-friendly interface. It is equipped with a powerful conical burr grinder that precisely grinds your coffee beans, allowing for maximum flavor extraction. One of its key features is the dual boiler system, which separates brewing and steaming functions, enabling users to brew espresso and steam milk simultaneously without any wait time. This model also incorporates a sophisticated homogenous brewing system, promoting even water distribution over the coffee grounds for a rich, full-bodied espresso.

The S13215 introduces advanced automation technologies that make it accessible to users of all skill levels. The integrated touchscreen interface provides an intuitive way to select from a variety of coffee drinks, including lattes and cappuccinos. The machine's automatic milk frother and customizable strength settings further enhance the brewing process, allowing for a personalized cup every time. Its self-cleaning feature simplifies maintenance, making it easy to keep the machine in top condition.

The S8 model is particularly known for its sleek design and compact footprint, making it ideal for smaller kitchens. Despite its size, the S8 doesn’t compromise on features. It boasts a high-performance grinder with an adjustable grind setting, combined with a rich crema producing system, ensuring rich and aromatic espresso. The user interface is designed for versatility, offering programmable coffee strength and size options. Its quiet operation is another bonus, allowing for a peaceful coffee-making experience.

Lastly, the S7 prioritizes durability and efficiency. This model showcases a powerful brewing technology that minimizes warm-up time and ensures consistent temperature control for every brew. It features a large water reservoir, reducing the frequency of refills. The S7's direct-access buttons for one-touch brewing capabilities streamline the coffee-making process, enabling users to quickly enjoy their favorite beverages.

In summary, the Capresso S9, S13215, S8, and S7 each deliver unique offerings through their advanced features and technologies. Whether it is the user-friendly interfaces, high-performance grinders, or compact designs, these models cater to both casual drinkers and serious enthusiasts, making them reliable choices for great coffee at home.
Top Page Image Contents