Capresso Impressa J5 Example, Ready, Visual Programming of CUP Size, Using PRE-GROUND Coffee Fig

•For the hot water button you can override the water volume.

•For the steam button you can override the steam duration.

Important:

•You always override the coffee strength, before you push one of the single-cup buttons.

•Coffee and Hot Water volume as well as steam duration you override after you push any of the beverage buttons.

Example:

Your 1-cup espresso button is programmed to STRONG 1.5 oz. Somebody wants a MILD 2oz. espresso.

READY

•Place a cup underneath the dual coffee spouts.

•Turn the Rotary Dial. The display shows four different strength settings MILD, NORMAL, STRONG, XSTRONG.

•Select MILD then push the 1-Espresso button. 1 ESPRESSO. MILD.

•While the J5 is grinding, turn the dial again. This time it will show the coffee volume. Select 2.0 OZ. The J5 will produce a

2.0oz mild espresso and will stop automatically. READY. The next time you push the 1 cup espresso button it will produce the programmed setting (STRONG 1.5 oz.)

Please note: When you select a different strength you must push one of the coffee buttons within the next 3 seconds, otherwise the J5 reverts back to READY.

Please note: When you push one of the double cup buttons and you change the volume, the display will always show the volume per cup, e.g. if you choose 7 oz. the Z5 will actually brew a total of 14 oz.

11.2 VISUAL PROGRAMMING OF CUP SIZE

Instead of overriding the volume or duration of the beverage buttons you can re-program the cup size and the duration of the steam by going into the programming functions (chapter 17.2) or by visually programming the output.

Example: you want to make sure your personal espresso cup is filled to the rim.

READY.

•Place the cup under the coffee spouts.

•Push and hold the 1-cup Espresso button until the display shows ENOUGH COFFEE ?. The J5 starts grinding and brewing espresso.

•Push the 1-cup Espresso button just before your cup is full and the display shows OK, then 1 ESPRESSO. This is now the new programmed volume for the 1-cup Espresso button.

This Push and Hold feature works for all four coffee buttons and the steam and hot water button.

11.3 USING PRE-GROUND COFFEE (Fig. 11)

You can also use pre-ground coffee, bypassing the grinder. This comes in handy if someone requests decaf coffee or a decaf cappuccino. You can also use the pre-ground funnel for ground flavored coffee.

IMPORTANT:

•Never fill the funnel with instant coffee.

•Do not fill the funnel with more than two scoops. The funnel is not a coffee storage container.

•If coffee is ground too fine it might be processed very slowly or the J5 will interrupt the process altogether.

16.