17.9 CHANGING THE LANGUAGE
Your J5 is set to ENGLISH. You can the display from English to French (FRANCAIS), Italian (ITALIANO), Dutch (NL) or German (DEUTSCH)
READY
•Push and hold the rotary dial until the display shows RINSE.
•Turn the dial clockwise until the display shows LANGUAGE.
•Push the rotary dial. The display shows ENGLISH.
•Turn the dial to select the desired language (e.g. ITALIANO) and push the dial to confirm. For two seconds the display shows OK and then it shows LINGUA (Italian).
•Turn the rotary until the display shows EXIT.
•Push the rotary dial. In this example (Italian) the display now shows PRONTO (instead of READY).
18. AUTOMATIC CLEANING CYCLES
18.1CLEANING WITH SPECIAL TABLET / READY CLEAN The machine monitors how many coffees are brewed and how often the rinsing program is activated. After approx. 200 coffees or 80 initial rinse cycles the display will show CLEAN / READY and the Rinse button is illuminated.
You can continue to make coffee, however we highly recom- mend cleaning the machine as described below within the next few days. This cleaning program will remove oil
Important: Once the cleaning program has started do not interrupt the procedure.
CLEAN / READY
1.Push the Rinse button. The display shows EMPTY TRAY Attention: If the tray and the used coffee container are already empty, you still need to remove the tray for approx. 20 seconds and then replace it.
2.Make sure that the water container is at least half full. Remove and empty the tray and the used coffee container and replace. The display shows PRESS RINSE and the rinse button is illuminated.
3.Place a container (at least 20 oz.) underneath the coffee spouts and push the Rinse button (Fig. 2).
4.The display shows CLEANING. The machine pumps one or two short cycles of water through the coffee spout. Then the display shows ADD TABLET.
5.Open the ground coffee funnel lid and drop one white tablet into the opening (Fig. 27). Close the lid. The display shows
PRESS RINSE.
6.Push the rinse button again, and the cleaning program continues. The display shows CLEANING. The machine starts the automatic cleaning program by dispensing water in intervals into the container underneath the coffee spout. The program stops automatically and the display shows EMPTY TRAY.
7.Remove the container and then the drawer and tray.
8.Empty the drawer and the ground coffee container and replace.
9.The display shows READY.
The machine will automatically remind you after the next 200 cups of coffee to repeat this cycle.
18.2 MANUAL TABLET CLEANING CYCLE
It is possible that the brewing process slows down before the automatic message (chapter 18.1) appears. Sometimes dark
28.