Capresso Impressa J5 Changing the AUTO-OFF setting, Looking UP Information The J5 lets you check

Page 27

• If you use the machine all day change the setting to the largest use interval, e.g. 4 hours. This way the machine is always ready to brew coffee.

Changing the AUTO-OFF setting:

READY,

•Push and hold the rotary dial until the display shows RINSE.

•Turn the dial clockwise until the display shows AUTO OFF.

•Push the rotary dial. The display shows 2 HRS.

•Turn the dial to set desired setting and push the dial to confirm. For two seconds the display shows OK and then AUTO OFF.

•Turn the rotary until the display shows EXIT.

•Push the rotary dial. READY.

17.7LOOKING UP INFORMATION The J5 lets you check...

• how many cups of coffee you made total and individually for each beverage button including the ground coffee funnel,

• how often you used the steam and hot water button,

• how how often you de-scaled the machine,

• how how often you ran a tablet cleaning cycle (CLEAN)

• how how often the filter was changed/activated.

It will also indicate if descaling, tablet cleaning or filter change will be due soon.

READY.

• Push and hold the rotary dial until the display shows RINSE.

• Turn the dial clockwise until the display shows INFO.

• Push the rotary dial. The display shows BUTTONS.

• Turn the dial to select from the following sub-programs: BUTTONS, DE-SCALE, CLEAN, FILTER (Filter will only come up, if a Clearyl filter is activated), EXIT.

Example: You would like to know how often the 1-Espresso button was used.

•INFO. Turn the dial until the display shows BUTTONS.

•Push the dial. The display will show the total number of coffees made, e.g. 36.

•Now push the 1-cup Espresso button. The display will show how often this button was used, e.g. 12.

•Push the dial again. The display shows BUTTONS.

•Turn the dial until the display shows EXIT.

•Push the button. The display shows INFO.

•Turn the dial until the display shows EXIT and push the dial.

READY.

17.8 CHANGING THE DISPLAY SETTINGS

This function lets you select the time format AM/PM or 24HRS format and the volume either in ounces OZ or milliliters ML.

READY.

•Push and hold the rotary dial until the display shows RINSE.

•Turn the dial clockwise until the display shows DISPLAY.

•Push the rotary dial. The display shows ML/OZ.

•Turn the dial to choose from 24 H / AM PM or ML / OZ or EXIT.

To change the coffee volume display from OZ to ML, chose ML / OZ and push the dial. OZ.

•Turn the dial to select ML and push to confirm. For two seconds the display shows OK and then it shows ML / OZ.

•Turn the dial to EXIT and push. The the display shows DIS PLAY.

•Turn the dial until EXIT and push the dial. READY.

27.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Impressa J5 Important Safeguards Jura-Capresso LLC Customer ServiceInside Welcome Pack a. Cleaning tablets Beverage Buttons Frothing range Tip Sleeve Table of Contents Programming / Information / Maintenance Clearyl water filter cartridgeDo not let the Clearyl filter dry out Welcome to the Impressa J5 Coffee Facts PLEASE, DON’T... or you void your warranty protectionBEAN-TO-CUP / Crema Coffee High Pressure Brewing Different Coffee DrinksCUP Illumination .13a Factory SettingsPLEASE, do ChapterFilling the Bean Container Turning the Machine onFilling the Water Tank About Coffee BeansTips for Hotter Coffee Adjusting the Grinder FigDaily Preparation Beverage Buttons FigESPRESSO, 2 ESPRESSI, 1 COFFEE, 2 Coffees Extremely Hot CoffeeCoffee with Milk Brewing Coffee and EspressoVisual Programming of CUP Size Using PRE-GROUND Coffee FigExample ReadyUsing the Frothxpress System Cappuccino and LatteRecommendation Making Cappuccino and Latte How much froth?Hotter Milk Cleaning the Frothxpress Using the Dual Frother PlusQuick Rinse Cleaning the Dual Frother Plus Using HOT WaterWater Care Clearyl Water Filter Cartridge Clearyl cartridgeHEATING. Ready Water Hardness Monitor Manual Clearyl ReplacementReady Filter Do not LET the Clearyl Filter DRY OUT17.1 Changing the Water Hardness Monitor ReadyOptional Cleaning Cycles Example for an additional Tablet Cleaning CycleDESCALE, EXIT, Rinse Buttons Parameters Options Energy Saving ModeSetting the AUTO-ON Time / Unit on Setting the TimeChanging the AUTO-OFF setting Changing the Display SettingsLooking UP Information The J5 lets you check Changing the Language Automatic Cleaning CyclesClean / Ready Manual Tablet Cleaning CycleDecalcifying / DE-SCALE Ready CleanKeeping Your Machine in TOP Shape Manual DecalcifyingEmptying System Before Transport Important / Emptying SystemTray Missing Empty GroundsNot Enough PRE-GROUND Fill BeansFill Water Tank Close CoverGrinder Makes AN Extremely Loud Noise no Beans are Ground Error MessagesError 2, Error Insufficient Frothed Milk ProductionSupplies Error 6, ErrorError ReasonsAny machine not purchased from an Authorized Jura This Warranty does not CoverJura-Capresso, LLC Other limitations and exclusions
Top Page Image Contents