D-Link DAP-1650 user manual Channel Width Visibility Status Security Mode

Section 3 - Configuration

Transmission Rate:

Channel Width:

Visibility

Status:

Security Mode:

Use the drop-down menu to select the appropriate transmission rate in Mbits per second. Many users will want to use the default

setting, Best (automatic).

Select the channel width:

Auto 20/40/80 - Select this option if you are using a combination of 802.11ac, 802.11n, and other wireless devices.

Auto 20/40 - Select if you are using both 802.11n and non- 802.11n wireless devices.

20 MHz - Select if you are not using any 802.11n wireless clients.

Select whether you would like the network name (SSID) of your wireless network to be Visible or Invisible to wireless clients. If Invisible, the SSID of the DAP-1650 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID of your wireless network in order to connect to it.

For information on how to set up wireless security, please refer to “Configuring Wireless Security” on page 36.

Click Save Settings at the bottom of the page to save the current configuration.

D-Link DAP-1650 User Manual 34