DeLonghi EUROCHEF - PRO installation instructions Eurochef PRO Wall Hood

Page 1

EUROCHEF - PRO WALL HOOD

INSTALLATION INSTRUCTIONS

1 2 3

Shown with accessory Duct Cover Kit and accessory Warming Lamp Kit

APPROVED FOR ALL RESIDENTIAL APPLIANCES

FOR RESIDENTIAL USE ONLY

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

INSTALLATION MUST COMPLY WITH ALL LOCAL CODES.

IMPORTANT: Save these Instructions for the Local Electrical Inspector’s use.

INSTALLER: Leave these Instructions with this unit for the owner.

OWNER: Retain these instructions for future reference.

SAFETY WARNING

Turn off power circuit at service panel and lock out panel

before wiring this appliance.

REQUIREMENT: 120VAC, 60 Hz. 20A Branch Circuit

READ AND SAVE THESE INSTRUCTIONS

EUROCHEF U.S.A.

41 MERCEDES WAY SUITE 25 EDGEWOOD NEW YORK 11717 – TEL. 866-844-6566

WWW.DELONGHIMAJORAPPLIANCES.COM

WWW.DELONGHIRANGES.COM

Image 1
Contents Read and Save These Instructions Eurochef PRO Wall HoodHoods Eurochef PRO Wall HoodRead These Instructions Completely and Carefully Product Dimensions Contents and page NumberAdvance Planning Using Duct Cover AccessoriesParts Provided Remove the RangehoodPrepare Hood for Installation Determine HOOD, Ductwork and Wiring LocationsFor Ducting Through Wall Please see Template Junction BOX LocationBlower Position Option Blower Position ChartHood size Motor If Changing Blower Position Security Screw Blower Upgrade KIT 30 and 36 HoodsHang Hood On Wood Bracket Test Duct Cover Fit do not install Duct coversAlternate Mounting Method Skip this Step if Using Wall Mounting MethodMount Hood onto Soffit or Cabinet Verify that power is turned off at the source Install Duct Covers Connect ElectricalConnect Ductwork Tighten Hanging Screws RE-INSTALL the Filter FrameInstall Filter Test Function of Hood Cleaning Hood Cleaning FiltersWarranty Care and USE Replacing Halogen BulbEurochef U.S.A