Blodgett SC-7E, SC-10E manual Maintenance Removal of Scale Deposits

Page 15

5.0MAINTENANCE

REMOVAL OF SCALE DEPOSITS

WARNING: Read and follow instructions on the CLR bottle. Use plastic or rubber gloves to avoid skin contact. IF CLR comes in contact with skin, rinse and clear water.

1.Drain steam generator tank by setting ON/OFF switch to off. Set cooking timer to “OFF”.

2.Set switch to de-lime. This closes drain valve.

3.Unscrew plug in deliming port at rear of unit. Insert hose in delime fitting. Pour 28 ounces of solution into generator slowly to avoid spillage. Remove hose. Screw plug into deliming fitting so it seals tightly.

4.Allow steamer to remain in ready cycle for ½ hour then turn ON/OFF switch off and allow generator to drain.

5.Flush cycle. Turn ON/OFF switch to on. When ready light comes on, switch to off to flush generator. Repeat this step three times to completely flush generator.

6.Clean exterior and interior. Use a mild solution of soap and water. Rinse with clean water. Dry with a soft clean cloth. Leave compartment door open when not in use.

7.The steamer is now ready for use or turn off for overnight shutdown.

15

Image 15
Contents SC-7E and SC-10E Important Notes for Installation and Operation Description Service Connections Installation Instructions LocationLeveling and Anchoring Plumbing Connections Electrical ConnectionWater Quality Drain ConnectionsSTART-UP Test Vent HoodOperation Controls Main Power SwitchShutdown Before First USEPreheat CookConstant Steam Cooking Constant Steam FEATURE, OptionalAdjustment for High Altitude Locations Timed CookingPreparation Cooking HintsWeekly, or more often if necessary CleaningGuidelines for Maintaining Stainless Steel Surfaces Maintenance Removal of Scale Deposits Possible Causes Troubleshooting ProblemWater Flows Into Drain During Shutdown Service Adjustment for High Altitude LocationsHeater Elements do not Come on Water Overflows Into Cooking Compartment