Blodgett SC-10E, SC-7E manual Troubleshooting Problem, Possible Causes

Page 16

6.0 TROUBLESHOOTING

PROBLEM

Cold water flows continuously into drain when steamer is OFF.

Water overflowing into cooking compartment.

Heater elements do not come on.

POSSIBLE CAUSES

Either or both solenoid valves are not closing. Contact your authorized service agency to repair or replace solenoid valves.

Problem with operating probe caused by either:

1.Short between probe terminal and body of steamer. Contact your authorized service agency.

2.Excessive scale build-up on probe. Contact your authorized service agency. Have water quality analyzed and corrected immediately to avoid damage to steamer.

1.Problem with contactors or thermostat coated with scalant. Contact your authorized service agency. Have water quality analyzed and corrected immediately to avoid damage to steamer.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SC-7E and SC-10E Important Notes for Installation and Operation Description Service Connections Location Installation InstructionsLeveling and Anchoring Electrical Connection Plumbing ConnectionsDrain Connections Water QualityVent Hood START-UP TestMain Power Switch Operation ControlsBefore First USE PreheatCook ShutdownConstant Steam FEATURE, Optional Adjustment for High Altitude LocationsTimed Cooking Constant Steam CookingCooking Hints PreparationCleaning Weekly, or more often if necessaryGuidelines for Maintaining Stainless Steel Surfaces Maintenance Removal of Scale Deposits Troubleshooting Problem Possible CausesService Adjustment for High Altitude Locations Water Flows Into Drain During ShutdownWater Overflows Into Cooking Compartment Heater Elements do not Come on
Top Page Image Contents