Blodgett SHO-E manual LEG Attachment, Caster Assembly, Casters for Single and Double Stacked Ovens

Installation

Oven Assembly

LEG ATTACHMENT

1.Lay the oven on its back.

2.Align the threaded stud in each leg with the nut located inside each bottom corner of the oven frame. Turn the legs clockwise and tight- en to the nearest full turn.

3.Align the two leg plate holes in each leg with those in the oven bottom. Secure each leg us- ing two 1/2” bolts.

NOTE: If using casters see CASTER AS- SEMBLY before proceeding.

4.Tip the oven up on the legs.

5.Level the oven by screwing the adjustable leg feet in or out as necessary.

CASTER ASSEMBLY

NOTE: Install the locking casters on the front of the oven. Install the non-locking casters on the back of the oven.

Casters for Single and Double Stacked Ovens:

1.Attach the legs as described.

2.Pry the adjustable feet out of the legs.

3.Insert one caster into each leg as shown. Tighten the lock nuts to secure the casters.

Adjustable

Leg Foot

Caster Assembly

Figure 4

Low Profile Casters for Double Stacked Ovens:

1.Align the three holes in each caster assembly plate with those in the oven bottom. Secure each caster using three 1/2” bolts.

6” (15 cm) Legs Shown
Figure 3	Figure 5

6