Using the Ventilated Electric Grill

Grilling on the shelf: In this case, the shelf supplied is placed on level 1 or 2 and the foods to be grilled are placed on top, while the tray is inserted on the lower levels to collect the cooking juices. Then turn on the grill element switching the thermostat to the relative position (electric oven version).

WARNING: Accessible parts may become hot when the grill is in use. Children should be kept away.

The ventilated electric grill is a special function equipped only on the multifunction oven. Set the 9 + 0 switch to the relative position to activate the grill element and the electric fan. Generally, to ensure excellent grilling, place the oven shelf in the middle position while the oven tray should be inserted at the bottom.

IMPORTANT: When using the ventilated electric grill, set the thermostat knob no higher than 175 °C, which is between the 150 °C and 200 °C setting, to avoid overheating the front of the appliance. In fact, ventilated grilling must be carried out with the door closed.

Note: The cooker is equipped with the cooling fan that starts operation each time the oven knob is on a position different from 0 (zero). The fan circulates the air between the control panel and the oven door and also allows the control panel and the oven door stay at a warm temperature during the appliance operation in any condition.

USING THE SELF-CLEANING OVEN

In the cookers where this feature is foreseen , the self-cleaning oven differs from the standard one for the fact that its internal surfaces are enamelled with a special microporous material which absorbs and eliminates the greasy particles during the cooking. In case of spillage of greasy liquids, the self-cleaning action becomes not efficient, therefore it will be necessary to clean the oven properly. Proceed in the following way: (a) wipe a humid sponge on the grease stains; (b) heat up the oven to the maximum temperature; (c) wait 5 minutes and then switch off the oven; (d) wait until the oven gets cool again; (e) wipe again the humid sponge on all the surface. Do not use detergent in any case.

ABNORMAL OPERATION

Any of the following are considered to be abnormal operation and may require servicing:

• Yellow tipping of the burner flame.	• Burners failing to remain alight.
• Sooting up of cooking utensils.	• Burners extinguished by cupboard doors.
• Burners not igniting properly.	• Gas valves, which are difficult to turn.

In case the appliance fails to operate correctly, contact Bertazzoni.

CLEANING THE APPLIANCE

Before cleaning the appliance, it should be disconnected from the power supply and turn off the main gas feeder valve.

Cleaning the work surface:

Periodically clean the burner heads, the enamelled steel grids, the enamelled covers and the flame caps using warm soapy water. Then those parts should be rinsed and thoroughly dried.

Any liquid that overflows from pots must always be removed using a rag.

If it becomes difficult to open or close a valve, do not force it, but immediately request the assistance of the technical service personnel.

Cleaning the enamelled parts:

To maintain the original features of the enamelled parts they should be cleaned frequently with soapy water. Never use abrasive powders. Do not leave acidic or alkaline substances on the enamelled parts (vinegar, lemon juice, salt, tomato sauce, etc.) and do not wash the enamelled parts while they are still hot.

Cleaning the STAINLESS steel parts:

Clean the parts with soapy water and then dry them with a soft cloth. The shine is maintained by periodically using special products that generally are found in the market. Never use abrasive powders.

Cleaning the burner flame caps:

Since the flame caps are resting on the burner, to clean them just remove them from their seat and wash them with soapy water. After they have been thoroughly dried and having checked that the holes are not clogged, they can be replaced in their proper position.

Cleaning the inner glass door: Clean the glass with warm soapy water using a sponge. A spatula can be used to remove burner fat if used gently.

ATTENTION: while cleaning the door make sure to avoid any spillage in the venting holes on the top part of the door. To clean inside the door it is necessary to disassemble the door through a service engineer.

ATTENTION: for further details about cleaning of the appliance, please contact your applliance retailer.

X906 DUAL, X906MFE, X906GEV specifications

The Bertazzoni X906 series, including the X906 DUAL, X906MFE, and X906GEV, represents a pinnacle of kitchen excellence, combining traditional craftsmanship with modern technologies and culinary innovations. These dual-fuel ranges are designed for avid home cooks who value both performance and aesthetics.

At the heart of the Bertazzoni X906 models is the dual-fuel configuration, which seamlessly merges the consistency of electric ovens with the responsiveness of gas cooktops. This dual-fuel capability allows home chefs to experience precise temperature control in the oven and instant heat adjustments on the stove, enhancing the overall cooking experience.

The X906 DUAL stands out with its robust five-burner configuration, providing ample space to accommodate multiple pots and pans simultaneously. Each burner features powerful output, with a high BTU option for quick boiling and a low setting for delicate simmering. Additionally, the continuous cast-iron grates ensure stability and durability while allowing for easy movement of cookware across the cooktop.

The X906MFE model is designed with an emphasis on efficiency and versatility. It features an advanced multi-function electric oven that supports various cooking modes, including convection baking, broiling, and more, allowing users to achieve professional baking results at home. This model also integrates energy-saving technology, ensuring optimal performance while reducing energy consumption.

For those who prioritize style alongside functionality, the X906GEV offers an elegant design that enhances any kitchen decor. With precise finishes and customizable color options, this range allows homeowners to express their personal style. The glass front oven door not only adds to its aesthetic appeal but also provides excellent visibility, allowing users to monitor their dishes without interruption.

The quality construction of the Bertazzoni X906 series includes heavy-duty stainless steel that ensures durability and ease of cleaning. The ranges are equipped with advanced safety features, including flame failure devices and automatic ignition, which manage the ignition of gas burners safely, offering peace of mind while cooking.

In conclusion, the Bertazzoni X906 DUAL, X906MFE, and X906GEV ranges are exemplary choices for those seeking a blend of functionality, efficiency, and elegance in their kitchen. With their innovative features and high-quality construction, these models are designed to inspire culinary creativity and provide professional-level cooking experiences in the comfort of home.