USE and Maintenance Manual, Using Burners

To replace the power cable, lift the terminal board’s cover and replace the cable. To access the terminal board in cookers with a 3x2.5mm² cable, the back panel on the rear of the appliance must be removed.

USE AND MAINTENANCE MANUAL

WARNING: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

WARNING: Children should be supervised to ensure that they do not play with the appliance.

DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE STORAGE DRAWER OR NEAR THIS APPLIANCE.

DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.

DO NOT STORE OR USE FLAMMABLE LIQUIDS OR ITEMS IN THE VICINITY OF THIS APPLIANCE.

WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT OR IN CARAVANS, IT SHALL NOT BE USED AS A SPACE HEATER.

WARNING: SERVICING SHOULD BE CARRIED OUT ONLY BY AUTHORISED PERSONNEL. DO NOT MODIFY THIS APPLIANCE.

Table 4 GAS BURNER DIMENSION (fig.21-22)

Burner	Dimension (mm)
Auxiliary	Ø 50
Semi-rapid	Ø 70
Rapid	Ø 95
Dual	Ø 140

CONTROL PANEL DESCRIPTION

On the control panel, small symbols show the function of each knob or key. Here as follows are the several controls that a cooker can have:

the symbol shows the disposition of burners on the worktop, the full dot identifies the burner in object (in this case the front burner on the right).

the symbol

shows the running of any oven (ventilated gas oven with electric grill, 9 positions switch)

the symbol

shows the electric thermostat for electric oven

USING BURNERS

A diagram is etched on the control panel above each knob which indicates which burner corresponds to that knob. The burners can be ignited in different ways depending on the type of appliance and its specific characteristics:

-Manual lighting (it is always possible even when the power is cut off): Turn the knob anticlockwise that corresponds to the burner selected, setting it to the MAXIMUM position at the etched star (large flame Fig.23) and place a lit match up to the burner.

-Electric ignition: Turn the knob counterclockwise that corresponds to the burner selected, setting it to the MAXIMUM position (large flame Fig. 23) and keep on pressing the knob in correspondence of the ignition symbol marked with a star (for cookers equipped with ignition trough knob) or press the ignition button marked with a star and release it as soon as the burner has ignited.

-Burner ignition equipped with safety device (thermocouple)(fig.24): Turn the knob anticlockwise that corresponds to the burner selected, setting it to the MAXIMUM position at the etched star (large flame Fig. 23), press the knob and activate one of the above-mentioned ignition devices. Once ignited, keep pressing the knob for about 10 seconds to allow the flame to heat the thermocouple. If the burner goes out after releasing the knob, repeat the entire operation.

X906 DUAL, X906MFE, X906GEV specifications

The Bertazzoni X906 series, including the X906 DUAL, X906MFE, and X906GEV, represents a pinnacle of kitchen excellence, combining traditional craftsmanship with modern technologies and culinary innovations. These dual-fuel ranges are designed for avid home cooks who value both performance and aesthetics.

At the heart of the Bertazzoni X906 models is the dual-fuel configuration, which seamlessly merges the consistency of electric ovens with the responsiveness of gas cooktops. This dual-fuel capability allows home chefs to experience precise temperature control in the oven and instant heat adjustments on the stove, enhancing the overall cooking experience.

The X906 DUAL stands out with its robust five-burner configuration, providing ample space to accommodate multiple pots and pans simultaneously. Each burner features powerful output, with a high BTU option for quick boiling and a low setting for delicate simmering. Additionally, the continuous cast-iron grates ensure stability and durability while allowing for easy movement of cookware across the cooktop.

The X906MFE model is designed with an emphasis on efficiency and versatility. It features an advanced multi-function electric oven that supports various cooking modes, including convection baking, broiling, and more, allowing users to achieve professional baking results at home. This model also integrates energy-saving technology, ensuring optimal performance while reducing energy consumption.

For those who prioritize style alongside functionality, the X906GEV offers an elegant design that enhances any kitchen decor. With precise finishes and customizable color options, this range allows homeowners to express their personal style. The glass front oven door not only adds to its aesthetic appeal but also provides excellent visibility, allowing users to monitor their dishes without interruption.

The quality construction of the Bertazzoni X906 series includes heavy-duty stainless steel that ensures durability and ease of cleaning. The ranges are equipped with advanced safety features, including flame failure devices and automatic ignition, which manage the ignition of gas burners safely, offering peace of mind while cooking.

In conclusion, the Bertazzoni X906 DUAL, X906MFE, and X906GEV ranges are exemplary choices for those seeking a blend of functionality, efficiency, and elegance in their kitchen. With their innovative features and high-quality construction, these models are designed to inspire culinary creativity and provide professional-level cooking experiences in the comfort of home.