Operation

q Place a record on the slip mat.

w Switch on the unit using the Power on/off switch located on the rear panel.

e Remove the stylus protector if applicable.

r Start the platter spinning with the START/STOP button.

t Position the tone arm over the record and gently lower to begin playback.

y Set the playing speed to either 33 1/3 or 45 RPM.

When turned on this unit is set to play at 33 1/3 RPM. To adjust to a 45RPM speed setting, press the 45 RPM button. This unit does not use a cue lever system for speed setting(s).

u Move the tone arm to the resting position and secure using the tone arm clamp.

i Push the START/STOP button to stop the platter from spinning.

o Turn the unit off.

If the power switch is turned off without pressing the START/STOP button, the electric brake will not function.

Remote Control

The START/STOP functions of the PDX-2300MkII can be controlled externally with equipment such as a foot switch peddle. An input jack is provided for this remote control on the rear panel of this unit.

Playing EP records

Fit the EP adapter over the center spindle and follow the same playing instructions as written above.

Stylus light (Detachable mini light)

A detachable stylus light is available for this unit.