50mm

Cartridge Installation

q Make sure that you follow the instructions included with your cartridge.

w Connect the lead wires to the respective terminals. Industry standard cartridges come with color-coded wires. Make sure that you match these colors correctly.

If using a light weight cartridge, we suggest the use of the shell weight enclosed.

e The overhang of your cartridge needs to be adjusted to best suit the A.S.T.S tone arm. For best tracking and stylus pressure a distance of 50mm (as shown) should be set.

NUT

SHELL

(OPTION r)

SHELL WEIGHT

(OPTION y)

CARTRIDGE

(ACCESSORY)

STYLUS

(ACCESSORY)

SCREWS

(ACCESSORY)

LEAD WIRE

TERMINAL

(ACCESSORY)

To avoid premature damage to the stylus take care to avoid touching it during any adjustment(s).

r Insert the head shell into the front part of the tone arm. Turn the looking ring in the direction shown below until the head shell is firmly fixed in place.