Vestax PDX-2300 owner manual Operation, Playing EP records, Stylus light Detachable mini light

OPERATION

qPlace a record on the slip mat.

wSwitch on the unit using the Power on/off switch located on the rear panel.

eRemove the stylus protector if applicable.

rStart the platter spinning with the START/STOP button.

tPosition the tone arm over the record and gently lower to begin playback.

ySet the playing speed to either 33 1/3 or 45 RPM.

NOTE

When turned on this unit is set to play at 33 1/3 RPM. To adjust to a 45RPM speed setting, press the 45 RPM button. This unit does not use a cue lever system for speed setting(s).

uMove the tone arm to the resting position and secure using the tone arm clamp.

iPush the START/STOP button to stop the platter from spinning.

oTurn the unit off.

NOTE

If the power switch is turned off without pressing the START/STOP button, the electric brake will not function.

Remote Control

The START/STOP functions of the PDX-2300 can be controlled externally with equipment such as a foot switch peddle. An input jack is provided for this remote control on the rear panel of this unit.

Playing EP records

Fit the EP adapter over the center spindle and follow the same playing instructions as written above.

Stylus light (Detachable mini light)

A detachable stylus light is available for this unit as an optional extra.

10