Advanced Pitch Control Features
The
qPITCH BEND & ULTRA SHIFT
Using the pitch bend joystick will allow you to quickly pull or push the playing pitch of this unit. To pull means to slow down, push means to speed up. Pushing the joystick towards the tone arm will result in you being able to pull (minus) the playing pitch. Pushing the joystick in the opposite direction will result in you being able to push (positive) the playing pitch. It is possible to set the increment of pitch adjustment or the pitch span to 1,2,3, & 6%. The basic pitch span setting is 2%. To change the pitch span setting press the joystick down. Pushing the joystick down once will set the span to 3%, twice 6%, three times 1% and a fourth time will set it back to 2%. You can also ultra shift the pitch by
NOTE
When the power is turned on, pitch bend is set at ±2%.
Display
Every time the stick controller is pressed, the display changes as shown below.
Currently set amount
Amount to | ( Initial setting ) |
be set |
|
wFINE PITCH CONTROL
The
eULTRA PITCH FADER
Using the ultra pitch fader will allow you to make dramatic and accurate pitch adjustments up to
11