Electrical & Installation requirements

www.zephyronline.com

ELECTRICAL REQUIREMENTS

Important:

Observe all governing codes and ordinances.

It is the customer’s responsibility:

•To contact a qualified electrical installer.

•To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70

— latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure range hood is properly grounded. Do not have a fuse in the neutral or ground circuit.

IMPORTANT:

Save Installation Instructions for electrical inspector’s use. The range hood must be connected with copper wire only.

The range hood should be connected directly to the fused disconnect (or circuit breaker) box through metal electrical conduit.

Wire sizes must conform to the requirements of the National Electrical Code ANSI/NFPA 70 — latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code Part 1 and C22.2 No. 0-M91 - latest edition** and all local codes and ordinances.

A U.L.- or C.S.A.-listed conduit connector must be provided at each end of the power supply conduit (at the range hood and at the junction box).

Copies of the standards listed may be obtained from:

*National Fire Protection Association Batterymarch Park Quincy, Massachusetts 02269 ** CSA International 8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575

BEFORE INSTALLING THE HOOD

1.For the most efficient air flow exhaust, use a straight run or as few elbows as possible. CAUTION: Vent unit to outside of building, only.

2.At least two people are necessary for installation.

3.The hood is fitted with Screws and Drywall Anchors suitable for most surfaces, consult a Qualified Installer, check if they perfectly fit with your cabinet/wall.

4.Do not use flex ducting.

5.COLD WEATHER installations should have an additional backdraft damper installed to minimize backward cold air flow and a nonmetallic thermal break to minimize conduction of outside temperatures as part of the ductwork. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the ducting enters the heated portion of the house.

6.Make up air: Local building codes may require the use of Make-Up Air Systems when using Ducted Ventilation Systems greater than specified CFM of air movement.

The specified CFM varies from locale to locale. Consult your HVAC professional for specific requirements in your area.

EBO-E42ASX, EBO-E36ASX specifications

The Zephyr EBO-E36ASX and EBO-E42ASX are advanced cooling solutions designed for commercial applications where energy efficiency, performance, and reliability are paramount. Both models offer superior features tailored for various industries, making them reliable choices for those seeking quality and durability in air conditioning technology.

One of the standout features of the EBO-E36ASX and EBO-E42ASX is their inverter-driven compressor technology. This innovation allows the units to adjust the compressor speed according to the cooling load, ensuring optimal performance while minimizing energy consumption. As a result, these models achieve higher Seasonal Energy Efficiency Ratios (SEER), significantly reducing electricity bills while also contributing to a more sustainable environment.

Both units are equipped with advanced air filtration systems. These systems incorporate multi-layer filters designed to capture airborne particulates, allergens, and pollutants. This feature not only enhances indoor air quality but also contributes to a healthier working environment, making the EBO models well-suited for offices, schools, and hospitals. The filters are easy to access and can be replaced or cleaned without hassle.

In terms of design, the EBO-E36ASX and EBO-E42ASX units come with compact dimensions, allowing for versatile installation options. They can be mounted in various orientations, fitting seamlessly into a range of architectural layouts. The exterior casing is crafted from durable materials, ensuring that the units withstand harsh weather conditions and maintain their aesthetic appeal over time.

Moreover, both models feature a quiet operation mode, a crucial aspect for environments where noise reduction is essential. Utilizing sound-dampening technologies, these units operate at low noise levels, contributing to a comfortable atmosphere in offices, restaurants, and homes.

Integration with smart home technologies is another remarkable characteristic of the EBO-E36ASX and EBO-E42ASX. They are compatible with various smart thermostats and can be controlled remotely through mobile applications. This feature enables users to monitor and adjust settings, ensuring optimal indoor comfort while maximizing energy efficiency.

Overall, Zephyr's EBO-E36ASX and EBO-E42ASX represent a blend of cutting-edge technology, efficient performance, and user-friendly design. Their commitment to energy efficiency, air quality, and quiet operation makes them exemplary options for those looking to enhance their indoor environments. With these models, Zephyr continues to push the boundaries of HVAC technology, ensuring comfort and sustainability in commercial and residential applications alike.