Zephyr CTP-E 48SX, CTP-E 60SX Nce C le aning, Surface Maintenance, Replacing Baffle Filters

Page 19

nce - C le aning

www.zephyronline.com

Surface Maintenance:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent , or steel wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

M a int ena

Baffle Filters

The Metal Filters fitted by the factory are intended to filter out residue and grease from cooking. They need not be replaced on a regular basis but are requiredto be kept clean.

Filters should be cleaned after every 30 hours of use. Use the Filter Clean Reminder function on the controls to determine when filters require cleaning.

Remove and clean by hand or in dishwasher. Spray degreasing detergent and leave to soak if heavilysoiled.

Remove filters by sliding away from center of hood and pulling down.

Dry filters and re-install before using hood.

Replacing Baffle Filters

Should filters wear out due to age and prolonged use, contact Zephyr to purchase replacements.

Handles

17

Image 19
Contents Use, Care, and Installation Guide Page Installation Table of ContentsRead and Save These Instructions Important safety NoticeModel CTP-ExxS Lis t of M a teria lsDuct pieces Equivalent number Total Ins ta lla tion Ductwork C a lcula tion S heetMinimum Duct Size Installation Mounting Height & ClearanceIns ta lla Tion DuctingSpecifications Ins ta lla tion Interna l B lower Included with the external blower Ins ta lla tion P repa ring Hood for E xterna l B lower Continue to page 11 for hood Installation instructionsElectrical Warning Installation Mounting the HoodIns ta lla tion M ounting the Hood Ductwork Electrical wiring On top of hood and secure with medium set screw Fea tures & C ontrols Touch C ontrols & F ea tures Re-setting Function Filter Clean ReminderHa nge Indica tor Replacing Baffle Filters Surface MaintenanceNce C le aning Baffle FiltersIntena nce Lights Hooting Issue Cause What to doAccessory Description List of Parts and AccessoriesPart Description Warranty