Zephyr CTP-E54SX, CTP-E 60SX, CTP-E 48SX manual Included with the external blower

Page 11

6.Attach junction box to internal flange using provided 1/2” self tapping screws and 4mm internal diameter washers.

8.Place blower with attached flange into motor housing as shown on Fig-A.

10.Att ach other end of capacitor box

connector and junction box connector to control board box and wiring box connector inside hood.

7.Attach grounding wires from junction box and motor to grounding screw as shown.

9.Attach using 1/2” self tapping screws to secure in place.

Continue to page “11” for hood installation instructions. For external blower installation please refer to the manual

included with the external blower.

9

Ins ta lla tion - Interna l B lower

Image 11

Contents Use, Care, and Installation Guide Page Installation Table of ContentsRead and Save These Instructions Important safety NoticeModel CTP-ExxS Lis t of M a teria lsDuct pieces Equivalent number Total Ins ta lla tion Ductwork C a lcula tion S heetMinimum Duct Size Installation Mounting Height & ClearanceIns ta lla Tion DuctingSpecifications Ins ta lla tion Interna l B lower Included with the external blower Ins ta lla tion P repa ring Hood for E xterna l B lower Continue to page 11 for hood Installation instructionsElectrical Warning Installation Mounting the HoodIns ta lla tion M ounting the Hood Ductwork Electrical wiring On top of hood and secure with medium set screw Fea tures & C ontrols Touch C ontrols & F ea tures Ha nge Indica tor Filter Clean ReminderRe-setting Function Replacing Baffle Filters Surface MaintenanceNce C le aning Baffle FiltersIntena nce Lights Hooting Issue Cause What to doPart Description List of Parts and AccessoriesAccessory Description Warranty