Lis t of M a teria ls, Model CTP-ExxS | Zephyr CTP-E54SX manual

MODEL: CTP-ExxS

1 - Hood

2 - Baffle Filters

4 - G U-10, 120V 50 W, halogen bulbs 2 - Utensil Rails

2 - Telescopic Duct Covers

4 - Telescopic Rods Sets

4 - Angle Bra ckets (27 3/8”)

4 - Angle Bra ckets (35 3/8”)

1- Ceiling MountingBra cket

1- Internal Flange

1- Motor Housing

1- HARDWARE PACKET

4 - Couplers

4 - Anchors

4- 2” Wood Screws

4- 2 1/2” Wood Screws

4- 1/2” Washers

26 - 1/2” Self Tapping Screws

4 - 1/2” Screws 5x15mm

4 - 5mm Internal Diameter Washers

4 - Adhesive Fasteners

4 - Cable Ties

1 - SMALL HARDWARE PACKET

10 - Short Set Screws

12 - Medium Set Screws

1 - Tool

1 -HARDWARE PACKET FOR ELECTRICAL CONNECTION AND EXTERNAL BLOWER CONNECTION

1- External Flange with Attached 8” Collar

1- Junction Box with Wires

1- External Blower Wiring B ox with Wires

12 - 1/2” Self Tapping Screws

1- Electrical Connection Wiring

12 - 4mm Internal Diameter Washers

Lis t of M a teria ls

NO DUCTING IS PROVIDED

EXTERNAL AND INTERNAL BLOWER SOLD SEPARATELY

Make sure to remove the protective film off of the hood before installation in order to make removal of the film easier. Be careful not to scratc h the stainless steel while installing.