Air King AK300LS, AK150LS, AK200LS manual Screws Ceiling Mounting Flange Slots, Use and Care

Page 4

housing and press flange in place so it is tight against the ceiling. Tighten both screws inside the housing. Install drywall screws (not included) through the holes in the flange and into the ceiling. Install as many drywall screws needed to ensure the flange fits tightly against the ceiling (Figure 12).

Screws

Ceiling

 

Mounting

 

Flange

Slots

 

Figure 12

Drywall Screw

 

SECTION 6

Use and Care

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE SERVICING THE UNIT.

1.Cleaning the Grill: Remove grill and use a mild detergent, such as dishwashing liquid, and dry with a soft cloth. NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS. Completely dry grill before reinstalling. Refer to instructions in Section 5 Finishing the Installation, to reinstall grill.

2.Cleaning the Fan Assembly: Wipe all parts with a dry cloth or gently vacuum the fan. NEVER IMMERSE ELECTRICAL PARTS IN WATER.

4.Install the grill by squeezing the two ends of the springs together and installing them up into the slots on the fan’s housing. Push the grill up into position (Figure 13).

Figure 13

5.Restore power and test your installation.

Troubleshooting Guide

 

Trouble

 

Probable Cause

 

 

Suggested Remedy

1.

Fan does not operate when the switch is on.

1a.

A fuse may be blown or a circuit tripped.

 

1a.

Replace fuse or reset circuit breaker.

 

 

1b.

Connector plug from motor is not plugged in.

 

1b.

Turn off power to unit. Remove Grill and plug motor into receptacle

 

 

 

 

 

 

in housing. Restore power to unit.

 

 

1c.

Wiring is not connected properly.

 

1c.

Turn off power to unit. Check that all wires are connected.

 

 

1d.

Motor has stopped operating.

 

1d.

Replace motor.

 

 

 

 

 

 

2.

Fan is operating, but air moves slower than normal.

2.

Obstruction in the exhaust ducting.

 

2. Check for any obstructions in the ducting. The most common are bird nests

 

 

 

 

 

 

in the roof cap or wall cap where the fan exhausts to the outside.

 

 

 

 

 

 

 

3.

Fan is operating louder than normal.

3a.

Motor is loose.

 

3a.

Turn off power to unit. Remove grill and check that all screws are fully

 

 

 

 

 

 

tightened. Restore power to unit.

 

 

3b.

Fan blade is hitting housing of unit.

 

3b.

Call your dealer for service.

210572051 Rev. A 8-05

 

www.airkinglimited.com

 

4 of 12

Image 4
Contents General Safety Information Important Instructions Operating ManualInstallation Instructions Wire DuctingDuct ScrewScrews Ceiling Mounting Flange Slots Use and CareLimited Warranty For Parts or Technical AssistanceReplacement Parts Diagram 1425Instructions Importantes Manuel D’OPÉRATION Instructions Générales DE SécuritéInstructions D’INSTALLATION Conduits ConduitVis De CâblageBride de Montage du Plafond Fentes Vis pour Utilisation et entretienGarantie Limitée Pour DES Pièces OU DE L’ASSISTANCE TechniqueDiagramme DES Pièces DE Remplacement

AK200LS, AK300LS, AK150LS specifications

The Air King AK series, including the AK300LS, AK200LS, and AK150LS, exemplifies the brand's dedication to innovation and performance in residential and commercial ventilation systems. Each model offers unique features tailored to diverse needs, ensuring optimal air circulation and overall comfort.

The AK300LS is recognized for its powerful airflow capabilities, making it an ideal choice for larger spaces. With a robust motor designed to deliver high performance, this model can efficiently ventilate areas up to 300 square feet. The unit features a smooth, quiet operation, ensuring minimal disruption in environments such as offices and homes. Its installation-friendly design allows for versatile mounting options, while adjustable speed settings provide users with control over their ventilation preferences.

The AK200LS offers a balanced approach, combining efficiency with moderate airflow capacity suitable for medium-sized rooms. This model stands out with its energy-efficient motor that helps to reduce electricity costs while maintaining excellent airflow. The AK200LS features an easy-to-use control panel, allowing users to adjust speed and settings seamlessly. Its lightweight construction simplifies installation and maintenance, making it a preferred choice for both residential and light commercial applications.

For those seeking a more compact solution, the AK150LS delivers effective ventilation in smaller spaces without sacrificing performance. This model is designed for areas up to 150 square feet, ideal for bathrooms, kitchens, or utility rooms. The AK150LS operates quietly, making it perfect for noise-sensitive environments. Its low-profile design blends easily into any decor, while still delivering a refreshing airflow. Energy efficiency is emphasized, contributing to long-term savings and eco-friendly operation.

All three models in the Air King AK series are built with durability in mind. They utilize high-quality materials and components, ensuring longevity and reliability. Moreover, the products are designed with ease of maintenance as a priority, featuring accessible filters that can be easily cleaned or replaced.

In summary, the Air King AK300LS, AK200LS, and AK150LS are each equipped with features that cater to specific ventilation needs, showcasing advanced technologies that promote energy efficiency and user convenience. These models not only enhance indoor air quality but also contribute to a more comfortable living and working environment, making them standout options in the market for effective ventilation solutions.