Sunfire Radio manual Output connections, Speaker-Level Outputs

CHAPTER 2

Output connections

FM 75 Ω

S	DVD	AUDIO/VIDEO		INPUTS
		SAT	VID1
VIDEO				VID2	VCR		AUDIO/VIDEO		OUTPUTS
						CD
							MAIN	VCR
									V
									ID2/MON2
COMP	DVD	SAT
VIDEO			VID1	VID2
					VCR
						CD
							MAIN	VCR

	Made in		Washington,
COMPONENT		VIDEO IN		U.S.A.
DVD	SAT		COMPONENT
		VID1				TRIGGERS
			MAIN OUT		MON2		RIGHT
						12VDC	SURROUND	RIGHT
			Y					MAIN

CENTER

LEFT	LEFT
MAIN

+

GND AM

VID2/MON2

DVD

SAT

VID1

VID2

L

VCR

CD

MAIN

VCR

VID2/MON2

L

R

AUDIO

INPUTS

R

PHONO

AUDIO

DAT

TAPE

OUTPUTS

L

DAT

8-CHANNEL

TAPE

LEFT

INPUTS

L SUR

L

CEN

LB SUR

R

R

PHONO

DAT

TAPE

DAT

TAPE

RIGHT

R SUR

SUB

RB SUR

				Cr
				Cb
DIGITAL
		AUDIO
DVD		SAT	INPUTS
			VID1	CD
STEREO		OUTPUTS
FIXED
	MAIN ZONE2			LEFT
			L
			R
FIXED
	MAIN ZONE2			RIGHT

	MAIN ZONE
	ZONE2
				SPEAKER
					LEVEL
DVD							AUDIO	OUTPUTS
	SAT						Sunfire
			VID1		Ultimate
CD						D	Receiver II
	DAT		VID2				IGITAL OUT		IEEE
LINE LEVEL		AUDIO							1394
LEFT SUR			OUTPUTS
	CENTER
			SUB2	LB	SUR		SIDES
						L			I R
							SIDE AXIS
									MAIN
									REPLACE WITH		ORIGINAL
									FUSE TYPE
										AND RATING
RIGHT SUR		SUB1
			SUB3
				RB
					SUR		R
							SIDE AXIS		ZONE2
									AC FUSE

		SURROUND
RIGHT	SURROUND
		BACK	LEFT
		OPTION
		SIDE-A
		OR
		ZONE2
	AC INPUT
120 VAC		60 Hz

STO RIGHT URROUND SPEAKER

+		+
			+
T
O RIGHT		CENTER
SPEAKER	TO
	SPEAKER		TO LEFT
			SPEAKER

Speaker-level audio signals From: Receiver speaker outputs To: Speaker inputs

+

TO LEFT SURROUND SPEAKER

+	+
T
O RIGHT	TO LEFT
AUX
SPEAKER	AUX
	SPEAKER

Speaker-level audio signals

From: Receiver Aux speaker outputs

To: Speaker inputs for surround back, side-axis or Zone 2 speakers

Speaker-Level Outputs

The Receiver's speaker output posts accept bare wire, speaker lugs, dual-banana and single-banana con- nectors. Use good quality speaker connectors and speaker wire.

If you are using banana plugs, make sure the Receiv- er's output posts are fully tightened by hand.

Always turn off the Receiver when you make speaker con- nections.

It is very important to check that the negative and positive speaker wires do not touch. This will prevent damage to the Receiver's internal ampliÞers.

The Receiver can be conÞgured so the Aux speaker outputs power the surround back, side-axis, or Zone 2 speakers. See page 41 for more details.

The top Þve speaker outputs are Þxed, and connect to your front, cen- ter and surround speakers.

Line-Level Outputs

The line-level audio outputs can be connected to external power ampli- Þers and powered subwoofers. For an example, if you choose the Aux speaker outputs to power your sur- round back speakers, you could use an external ampliÞer to power side- axis speakers, and a second power ampliÞer to power Zone 2 speakers.

23

User's Manual