Wolf Appliance Company PW362418 dimensions C T I N G C O N S I D E R a T I O N S

Planning Information

Pro 24" (610) Deep Wall Ventilation Hood

M O D E L P W 3 6 2 4 1 8 ( R )

D U C T I N G C O N S I D E R A T I O N S

Wolf Pro 24" (610) deep wall hoods are shipped without the blower assembly. Internal, in-line and remote blower assemblies are available.

IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower.

Pro 24" (610) deep wall hoods have a vertical discharge. A horizontal discharge kit is available as a sales accessory.

The hood will operate most efficiently when ductwork does not exceed 50' (15 m) in length.

Local building codes may require the use of make-up air. Consult your local HVAC professional for specific requirements in your area.

IMPORTANT NOTE: Wolf Pro 24" (610) deep wall hoods must be vented to the outside except when used with the accessory recirculating kit with the 600 CFM blower. Use only metal ductwork.

Refer to the illustration below for ducting considerations for Pro 24" (610) deep wall hoods.

DUCTWORK INSTALLATION

THROUGH ROOF

ROOF CAP OR REMOTE BLOWER

10" (254) ROUND DUCT

TRANSITION 221/4"W x 9"D TO 10" ROUND 10"H (INCLUDING FLANGES)

SOFFIT OR CABINET

OR DUCT COVER

VERTICAL DISCHARGE

Ducting for Pro 24" (610) deep wall hoods.

18" (457)

HEIGHT OF HOOD

30" TO 36"

(762–914)

COUNTERTOP

TO BOTTOM OF

VENTILATION HOOD

WALL HOOD

24" (610)

DEPTH OF HOOD

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

NOTE: HORIZONTAL DISCHARGE REQUIRES AN ACCESSORY KIT.

Dimensions in parentheses are in

millimeters unless otherwise specified. 6