Sunfire TGP-5(E) manual Specifications

Page 58
Tone Control: Bass: Treble:
Audio Outputs
Frequency Response: All but subwoofer:
(Large):
Sub:

APPENDIX

Specifications

Line Level Inputs

Sensitivity

 

(for 0.5 V output):

125 mV

Phono:

1.6 mV

Frequency response:

20 Hz-20 kHz +/- 0.5 dB

Signal to Noise (relative to 2V out):

Analog 97 dB

Digital 105 dB

Distortion (THD):

< 0.03%

Separation (at 1 kHz): 70 dB

+/- 10 dB +/- 10 dB

20 Hz-20 kHz

20-160 Hz

(crossover set to 160 Hz) (The Sub plays the bass from the other channels using Bass Man- agement)

Delay adjustment

Center: 0-25 ms

Rear: 0-25 ms (delay adjustment is automatic when the speaker distance is en- tered in feet)

Video Section

Video inputs/outputs: 1 Vp-p 75 ohms

FM Tuner Section

FM range: 87.5-108 MHz

0.2MHz steps (0.05 MHz for some export models)

Usable sensitivity (Mono):

1.6uV (75 ohms)

15.2dBf (75 kHz

DEV, 30 dB)

50dB quieting sensitivity (Stereo):

31.6uV (75 ohms)

41.2dBf

Audio output frequency range: 30 Hz to 15 kHz, +.5 dB, -3 dB

AM Tuner Section

AM range: 530-1710 kHz 10 kHz steps (9 kHz for some export models)

Usable sensitivity: (30% mod., S/N 20 dB): 16 uV / (600 uV/m)

S/N (30% mod., 1 mV input): 48dB

Trigger Outputs

12 V Main and Zone 2 Trigger current less than 500mA total

Main zone trigger relay contact rating: 24 VDC 2A maximum

XLR Outputs

Pin 1 Ground

Pin 2 Positive

Pin 3 Negative

Infrared Inputs

Optically Isolated

Standard 1/8” mini jacks

Standard 12V signal level

Power Requirements

US Model TGP-5:

120 VAC 50-60 Hz: 50 W

European Model TGP-5(E):

230 VAC 50-60 Hz: 50 W

Dimensions

17” Wide x 5.75” High x 16.5” Deep

Net Weight

22 lbs

Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and other U.S. and world-wide patents issued and pending. “DTS”, “DTS-ES” and “Neo:6” are trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, "Surround EX," and the

Bandwidth

Component: 100 MHz, -1.5 dB

RS-232

Rear Panel View

double-D symbol are trademarks of Dolby Laboratories.

Composite:

6 MHz, -2 dB

S-video:

18 MHz, -1.5 dB

Sunfire Universal Video Composite→S→Component and S→Component (Transcoder/upconverter is fully automatic)

Television Broadcast Standard

US:

NTSC only

Export:

PAL-BGIH only

HDMI switcher max resolution: 1080i

9600 baud simple ascii control

(9600-8-N-1)

Ethernet

10/100T with embedded webpage and Telnet control

© 2006 Sunfire Corporation.

All rights reserved. Sunfire Corpora- tion reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.

Manual part number:

913-121-00 Rev A

58

User's Manual

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Theater Grand Processor Important Safety Instructions NEC National Electrical Code Contents Introduction UnpackingFeatures Remote FeaturesOverview MainQuick Start Guide ExitFurther Information Mode Buttons Front Panel FeaturesPower DisplayTuner Controls VolumeLock Indicators Tone ControlsRear Panel Features AM Antenna Power SwitchFM Antenna Ground ScrewInstallation System Configurations Analog audio and composite videoDigital audio and component video connections Hdmi OUTLD connections external RF Demodulator and S-Video RF demodulatorVCR connections analog audio and composite video DVDCD and Antenna connections AM Loop AntennaTurntable connections Tape Player connections Channel Input connections analog audio Amplifier connections SpeakersZone 2 connections Remote Control Operating the TGP-5 with the Remote ZoneRemote Setup PRORemote Setup LearnRecal Recall MacroQuick Information On Screen Display OSDOSD Activation Main MON2OSD Menus Tone Menu Trim and Tone MenusTrim Menu Modes Menu Input Configuration Menus Input MenusInput Menus Tuner Preset Menu Tuner Preset MenusPreset procedure Zone 2 Menu Main Zone and Zone 2 MenuMain Zone Menu Software Menu Video, Software and Control MenusVideo Menu Control MenuSpeaker Size Menu Speaker Size MenuSpeaker Position Menu Speaker Calibration Menu Speaker CalibrationCrossover Crossover adjustment Subwoofer ModeSpeaker Crossover Menu Surr CrossoverUsing the TGP-5 Video Conversion Bass ManagementParty Jazz Club Surround Modes for 2-Channel SourcesStereo Dolby PRO Logic Source DirectSurround Modes for Multi-Channel Sources Dolby DigitalTuner Operation Recording to a Tape Player RecordingRecording to a VCR Connections IndicatorsZone 2 Operation Turning on ZoneSonic Holography Software Upgrade Software Revision ListSoftware CD Front Speakers Speaker PlacementAppendix Center speakerSubwoofer Location Side-Axis SpeakersSurround Speakers Surround Back SpeakersRS-232 Port Troubleshooting Guide No sound from one or more speakersNo Tone Controls Your amplifiers shut down often Remote Control Codes Audio ComponentsTape Decks Input Settings Mode Settings Tone SettingsZone Settings Video SettingsSpecifications Limited Warranty Service AssistanceTGP-5 Addendum

TGP-5(E), TGP-5 specifications

The Sunfire TGP-5 and TGP-5(E) are high-end audio processors that cater to audiophiles and home theater enthusiasts seeking exceptional sound quality and advanced features. These models are designed with a commitment to delivering pristine audio performance across various formats, making them ideal for both music and movie playback.

One of the standout features of the TGP-5 is its robust digital signal processing capabilities. The device is equipped with a state-of-the-art multichannel DAC that ensures accurate sound reproduction and a high signal-to-noise ratio. This component allows for the processing of high-resolution audio formats, including DSD, ensuring that users can enjoy their music as intended by the artist. The TGP-5(E) version further enhances this experience by offering enhanced room correction technology, which automatically calibrates the system based on the specific acoustics of the listening environment. This feature optimizes audio performance by adjusting frequency response, thereby eliminating unwanted resonances and improving overall sound clarity.

The user interface of the TGP-5 series is designed for ease of use, featuring a straightforward menu system accessible via its front panel display or remote control. Connections are abundant, offering a variety of digital inputs, including HDMI, coaxial, and optical, alongside traditional analog RCA inputs. These options ensure compatibility with almost any home theatre setup and allow integration with modern streaming services and devices.

Another noteworthy characteristic is the TGP-5's support for surround sound formats, including Dolby Atmos and DTS:X. This capability allows users to create an immersive audio experience that enhances movie watching and gaming sessions. Additionally, the TGP-5 incorporates advanced connectivity options, such as Bluetooth and Wi-Fi, enabling wireless streaming from smartphones and tablets.

In terms of build quality, the Sunfire TGP-5 series boasts a sleek and elegant design, typically encased in a sturdy chassis that minimizes vibration and interference. This construction not only enhances durability but also adds a touch of sophistication to any audio setup.

In summary, the Sunfire TGP-5 and TGP-5(E) represent a blend of cutting-edge technology, exceptional audio fidelity, and user-friendly features. With their advanced processing capabilities, comprehensive connectivity options, and support for modern audio formats, these processors are a compelling choice for anyone looking to elevate their audio experience.
Top Page Image Contents