Wolf Appliance Company PW302210R dimensions L F B L O W E R a S S E M B L I E S

Planning Information

Pro Low-Profile Wall Ventilation Hood

M O D E L P W 3 0 2 2 1 0 ( R )

W O L F B L O W E R A S S E M B L I E S

A ventilation system must include a blower assembly. Wolf ventilation hoods are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appliance, CFM requirements and homeowner preferences. Internal, in-line and remote blower assemblies are available as sales accessories through your Wolf dealer.

IMPORTANT NOTE: Use only a Wolf blower with all Wolf ventilation products.

Internal blowers are mounted inside the hood canopy. In-line blowers are mounted in between the hood and the exterior of the home. Remote blowers can be mounted on the roof or in some cases, on an exterior wall. Refer to the illustra- tions below for dimensions of Wolf in-line and remote blowers.

Pro ventilation recommendation charts on the following page provide minimum CFM recom- mendations according to the cooking appliance and ventilation hood used and blower options for each specific Pro low-profile wall hood.

	243/8"
	(619)
113/4"
(298)
181/2"
(470)
	41/2"
	(114)
211/2"	121/4"
(546)
	(311)

In-line BLOWER-60IL

		203/4"
281/4"		(527)
(718)	10" (254)
	Diameter
151/2"		241/2"
(394)
		(622)
	14"
	(356)
	243/4"	43/4"
		(121)
	(629)

Remote BLOWER-60REM and BLOWER-90REM

Unit dimensions may vary by ± 1/8" (3).

Dimensions in parentheses are in
millimeters unless otherwise specified.	7