Bakers Pride Oven BLF-FC operation manual Troubleshooting

Automatic Lift Fryer Maintenance

Troubleshooting

Refer to the table below for troubleshooting information.

Problem	Cause	Possible Solution
Shortening Heating Too	Low voltage or improper	Contact an authorized BKI service agent
Slowly	voltage	for corrective action.
	Bad thermostat or loose	Contact an authorized BKI service agent
	wires	for corrective action.
	Weak heating elements or	Contact an authorized BKI service agent
	heating elements breaking	for corrective action.
	down
	Coil on contactor is bad	Contact an authorized BKI service agent
		for corrective action.
	Breading build-up on heating	Clean heating elements. If problems
	elements	persist, contact an authorized BKI service
		agent for corrective action.
Filter System Not	Uncertain	Press the reset button on end of pump
Working		and hi-limit reset button under control
		panel. If problems persist, contact an
		authorized BKI service agent for
		corrective action.
	Connections not tight	Tighten the connections. If problems
		persist, contact an authorized BKI service
		agent for corrective action.
	Filter valve not open	Contact an authorized BKI service agent
		for corrective action.
	Filter paper on screen	Change filter paper. If problems persist,
	clogged with crumbs	contact an authorized BKI service agent
		for corrective action.
	Motor hums, but does not	Check for clogged pump. If problems
	pump	persist, contact an authorized BKI service
		agent for corrective action.
	Motor and pump coupling	Contact an authorized BKI service agent
	worn	for corrective action.
	No power to control panel	Make sure drain valve is completely
		closed. If problems persist, contact an
		authorized BKI service agent for
		corrective action.
Computer Hangs	Computer malfunction.	Press and hold the Toggle/Clear button
		while moving the FRY/OFF/FILTER
		switch from FRY to OFF and back to
		FRY. If problems persist, contact an
		authorized BKI service agent for
		corrective action.

28