Instructions Safety Instructions
Window Installation Instructions.
Remove the Air Conditioner from the Case
3 |
| Pull to unlatch the lower corners of the inlet |
| Remove the two locking screws and locking | |
A | F | ||||
grille and lift it up and off. | brackets from the lower front of the unit. | ||||
|
|
Tips Installation Instructions Operating
B
C
Using the tab, pull up slightly on the filter to release it and pull it down to remove.
Remove the two grille frame screws.
G
Remove the screw securing the ground wire to the right side face of the unit.
Consumer Support Troubleshooting
Grille frame screws
DPull the grille with your thumb while
pushing the case with your fingers.
EPush the grille to the left and raise it up.
Lift the grille frame up and off.
NOTE: Do not pull the bottom edge toward you more than 3 inches or you may damage the tabs of the grille.
10
Ground wire
Screw
HSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.
