Attach the Case to the Window Sash and Install the Foam Top Window Gasket
11 |
| Drill a 1/8″ pilot hole and attach the top |
| Cut the foam top window gasket to the | |
A | B | ||||
mounting rail to the sash with a Type B screw. | window width. | ||||
|
| ||||
|
|
|
| Stuff the foam between the glass and the | |
|
| Type B screw | C | ||
|
| window to prevent air and insects from getting | |||
|
| Top mounting rail | |||
|
|
|
into the room.
Safety Instructions Operating Instructions
Install the Air Conditioner in the Case
12 | A | Slide the air conditioner into the case. Do not |
push on the controls or the finned coils. Make |
sure the air conditioner is firmly seated.
D
Attach the front grille frame to the case by inserting the tabs on the grille frame into the slots on the front top of the case. Push the grille frame in until it snaps into place around the power cord on the right side.
Installation Instructions
B | Reinstall the locking brackets and screws | Guide the lever carefully |
through the grille frame as | ||
| removed earlier. | you push it in. |
| E | Secure the front grille frame to the case by |
|
| replacing the screws removed earlier. |
| IMPORTANT! Reconnect the ground wire |
C | |
| to the air conditioner. |
|
Ground wire |
|
|
|
Screw | F | Install the filter. Hook the inlet grille in the |
|
| 15 | ||
|
| frame and close it. Connect power. |
Troubleshooting Tips Consumer Support
