Assemble the Supports
8 | A | Loosely attach a support bracket to a support | |
rail using 2 Type A screws. | |||
|
Type A screws 
Support rail
Support bracket
NOTE: The support bracket may be attached into either slot in the support rail, depending on the depth of your window sill.
BThread a leveling bolt into the support bracket. An adjustable wrench may be needed.
Support bracket
Leveling bolt
CBefore attaching the support, hold the neck of the support rail against the back edge of the window stool.
Stool |
|
| Adjust as |
Neck of | needed |
| |
support rail |
|
DAdjust the position of the support bracket inward or outward on the support rail until the leveling bolt is near the outside edge of the sill. NOTE: Make sure that the leveling bolt will be firmly supported by the sill.
ETighten the Type A screws to secure the support bracket to the support rail in the correct position.
FRepeat steps A - E to assemble the second support.
13
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support
