Pitco Frialator PCC14, PCC28, PCC18 Unpacking and Inspection, Freight Damage Procedure

Page 4

This appliance should be thoroughly

cleaned prior to use.

See the CLEANING INSTRUCTIONS, on page 7 of this manual.

NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation.

Refer to SHIPPING DAM-

AGE CLAIM PROCEDURE on bottom of this page.

UNPACKING AND INSPECTION

1.Remove the cabinet from shipping carton, ensuring that all packing ma- terials and protective plastic has been removed from the unit. Inspect all components for completeness and condition.

2.If any freight damage is present, a freight claim must be filed immediately with the shipping company.

3.Freight damage is not covered under warranty.

4.Check to insure all components are included; cabinet, instruction packet and additional accessories, such as product dividers.

5.Read operation instructions completely.

6.Connect power cord to grounded and properly wired electrical source as specified.

7.Appliance should be thoroughly cleaned before use. See CLEANING INSTRUCTIONS, page seven.

FREIGHT DAMAGE PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of damage. Contact your dealer immediately.

3.CONCEALED DAMAGE: If damage is unnoticed until the merchandise is unpacked, notify the transporta- tion company or carrier immediately, and then file a “CONCEALED DAMAGE” claim with them. This should be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the con- tainer for inspection.

Pitco cannot assume liability for damage or loss incurred in transit, freight damage is not covered under war- ranty. We will, however, at your request, supply you with the necessary documents to support your claim.

4

Image 4
Contents Table of Contents Crisp N’ HoldSafety Precautions Features & Specifications Freight Damage Procedure Unpacking and InspectionInstallation & START-UP Risk of personal injuryThermostat Calibration Normal OperationHOT Surface Cleaning Procedures Electric Shock HazardWiring Diagrams Replacement Parts Part Number Description PCC14 PCC18 PCC28Troubleshooting Guide Symptom Possible Cause Suggested RemedyPitco Warranty