1 Fire Safety Systems
If your appliance is equipped with SPINFRESHTM, the tank enclosure can interfere with the performance of pre- existing fire safety systems. Modifications to the fire safety system should be performed by a professional who is qualified in installing, designing and maintaining your fire safety system prior to operating any SPINFRESHTM appliance.
WARNING
Replacing or adding appliances under a
2 Operation
If the appliance is equipped with SPINFRESHTM, place the basket directly onto the basket lift pin and close the lid prior to starting the timer(s). The basket(s) will be lowered into the cook tank when the timer cycle starts. At the end of the preset cooking time, the basket lift will raise the basket out of the cook tank and spin the basket to remove excess oil. The lid may be opened during the cooking cycle but must be closed prior to the spin cycle.
WARNING
NEVER open the lid or reach into the SPINFRESHTM enclosure during the spin cycle. Serious injury could result.
3 Troubleshooting
Issue | Possible Causes | |
| Basket lift Circuit breaker is tripped | |
| Loose power connection to basket lift | |
Basket does NOT travel up or down | Basket lift transformer | |
Basket lift driver board | ||
| ||
| Damaged/improperly wired relay | |
| Basket lift actuator | |
| Basket lift Circuit breaker is tripped | |
| Loose power connection to basket lift | |
Basket does NOT spin | Lid magnet switch | |
Power supply | ||
| ||
| Stepper motor driver board | |
| Stepper motor | |
| Product is not placed evenly in the basket. | |
Basket spins erratically | Bottom plate (holds basket straight in appliance) | |
| Improper basket engagement |