Polycom EF2241 manual LCD Menu Structure

Page 29

LCD MENU STRUCTURE

must be flashing. To make the parameter flash (assuming the front panel is not locked) press ENTER. Once the parameter is flashing, use the UP and DOWN buttons to adjust the parameter value. The parameter is instantly updated while it is being adjusted — you should hear changes as the parameter is changing. RS-232 control strings are also sent via the RS-232 port so your remote control device is instanta- neously updated as well. Press ENTER to select and store the parameter value or press ESC to cancel the selected value and return to the old value. Pressing HOME has the effect of pressing ESC then HOME, so the selected value will be cancelled and the menu will return to the top of the menu tree.

Parameters that toggle or select among a list of options will wrap around when you reach the end, but parameters that adjust numeric values will not wrap around once the maximum or minimum value is reached. While adjusting a parameter, the UP/ DOWN button must be held down briefly before the repeat rate increases.

© Polycom, Inc.

27

VORTEX EF2241 Reference Manual

Image 29

Contents Vortex EF2241 Reference Manual Page Introduction Introduction Welcome How to Use This ManualProduct Product FeaturesProduct Registration Inputs Outputs Remote Control Tools Needed for Installation PRE-INSTALLATIONWhat’s Included What’s Not IncludedEF2241 Front and Rear Panels PRE-INSTALLATION Connecting the EF2241 to Other Equipment InstallationMounting the EF2241 North American RequirementCodec Typical EF2241 ConnectionsDevice IDS on the EF BUS Connecting Multiple Vortex DevicesTerminating the EF2241 Factory Default Settings PresetOff Check Surrounding Equipment Presets Multiple Vortex DevicesPick a Standard Signal Level Configure Program Audio Sources Calibration Input SettingsIntegrating the EF2241 Into Your System Set Levels on Line Input Channels Build Your Echo Canceller Reference SET UP the Phone InterfaceEcho Canceller Reference for Multiple Vortex Devices Customize Setting for Your Particular ApplicationBus Reference Setting upAutomixer Parameters Configure the Automatic Microphone MixerGlobal Settings Channel Settings Automixer Settings for Multiple Vortex DevicesBuilding Your System with Multiple Vortex Devices Configure the Matrix MixerDefault Settings Assign Inputs Assign Outputs Configure the submatrixEF BUS Configure Your Echo Canceller Reference PresetsOther EF2241 Features LCD Menu Tree LCD Menu StructureLCD Menu Structure System System MenuPhone Control Phone ControlInputs 1-4, T, A-D InputsAutomixer Menu OutputsGlobal Settings Mixer Settings Matrix Matrix MenuInput/Output EQ Channel Band Parametric EQ MenuMacros PresetsAutomatic Microphone Mixer TroubleshootingNo microphones are gating Some microphones are not gating Too many microphones are gatingMatrix Mixer Echo Canceller ReferenceResidual Echo Room Audio Sounds ChoppyFinding the Source of Echo Room Gain Room Gain Excessive Room GainIn-Conference Quick Check Excessive Microphone Amplification Nonlinearity InsufficientEmail vortex@polycom.com Contacting Technical SupportTechnical Specifications US Telco requirements ComplianceUSA and Canada Canadian Telco Requirements Automatic Dialing Telco ConnectorRest of World AustraliaThis page was intentionally left blank CE Mark R& TTE Directive Vortex EF2241 Reference Manual Technical Support Noise and Reverberation Consider Room Gain Conference System DesignEN Echo Canceller, Noise Canceller EF2241 Block DiagramEF Bus Connector PinoutsInput/Output Remote Control Port Instructions Connecting Unbalanced RCA to Balanced Mini PhoenixMaking AN EF BUS Terminator Additional Notes RMA# Must be on package Warranty InformationState Law Rights What this warranty does not coverDefinition of Terms Echo CancellerAcoustic Echo Crosspoint Mix Minus BusNOM NOM Attenuation NOM Bus Presets Room GainDefinition of Terms Index NOM Index Page 1725-80098-001-C