Polycom EF2241 manual Input/Output Remote Control Port

Page 56

CONNECTOR PINOUTS

Input/Output Remote Control Port

 

INPUT

13

1

25

14

 

REMOTE CONTROL

OUTPUT

5,15 VDC

31 5 2 4

Logic Input: Pins 1-24 are inputs 1-24, respec- tively. Pin 25 is ground.

Logic Output: Pins 1-20 are outputs 1-20, respec- tively. Pins 21-25 are ground. Each ground pin should be used with only 4 outputs. For example, outputs 1-4 could be connected to LEDs, which are connected to ground pin 1.

LEDs can be used without series resistors (we have provided series resistors in the circuitry). For best results, LEDs with Vf=2.0 V and If=20 mA should be used. Larger values may be used, but may result in dimmer LEDs. An LED with Vf less than 1.4 V should not be used without additional series resis- tance.

Power Supply Input

The power supply input accepts a 5-pin DIN male connector. Only use the power supply provided by Polycom. Use of other power supplies will void the warranty.

1 Ground; 2 Ground; 3 +5Vdc @ 3 A; 4 -15Vdc @ 0.3 A; 5 +15Vdc @ 1.2 A

Mic/Line Inputs, Line Inputs, Line Outputs

These audio connectors accept a mini (3.5 mm) 3 conductor terminal block (provided). See Note below for manufacturer information.

From left to right the conductors are positive signal, negative signal, and shield ground.

Note The information below lists manufacturer information for the Phoenix connector that is compatible with the parts we use:

Manufacturer: Phoenix Contact

Description: Mini-COMBICON 3-position plug, 3.5 mm pitch

Type Number: MC 1.5/3-ST-3.5 or MC 1,5/3-ST-3,5

Part Number: 1840379

VORTEX EF2241 Reference Manual

52

Technical Support: 800.932.2774

Image 56
Contents Vortex EF2241 Reference Manual Page Introduction Welcome How to Use This Manual IntroductionProduct Product FeaturesProduct Registration Inputs Outputs Remote Control PRE-INSTALLATION Tools Needed for InstallationWhat’s Included What’s Not IncludedEF2241 Front and Rear Panels PRE-INSTALLATION Installation Connecting the EF2241 to Other EquipmentMounting the EF2241 North American RequirementTypical EF2241 Connections CodecConnecting Multiple Vortex Devices Device IDS on the EF BUSFactory Default Settings Preset Terminating the EF2241Off Check Surrounding Equipment Presets Multiple Vortex DevicesPick a Standard Signal Level Configure Program Audio Sources Calibration Input SettingsIntegrating the EF2241 Into Your System Set Levels on Line Input Channels SET UP the Phone Interface Build Your Echo Canceller ReferenceEcho Canceller Reference for Multiple Vortex Devices Customize Setting for Your Particular ApplicationSetting up Bus ReferenceConfigure the Automatic Microphone Mixer Automixer ParametersGlobal Settings Automixer Settings for Multiple Vortex Devices Channel SettingsBuilding Your System with Multiple Vortex Devices Configure the Matrix MixerDefault Settings Configure the submatrix Assign Inputs Assign OutputsEF BUS Configure Your Echo Canceller Reference PresetsOther EF2241 Features LCD Menu Structure LCD Menu TreeLCD Menu Structure System Menu SystemPhone Control Phone ControlInputs Inputs 1-4, T, A-DOutputs Automixer MenuGlobal Settings Mixer Settings Matrix Menu MatrixParametric EQ Menu Input/Output EQ Channel BandPresets MacrosTroubleshooting Automatic Microphone MixerNo microphones are gating Some microphones are not gating Too many microphones are gatingEcho Canceller Reference Matrix MixerResidual Echo Room Audio Sounds ChoppyFinding the Source of Echo Room Gain Excessive Room Gain Room GainIn-Conference Quick Check Excessive Microphone Amplification Insufficient NonlinearityContacting Technical Support Email vortex@polycom.comTechnical Specifications US Telco requirements ComplianceUSA and Canada Automatic Dialing Telco Connector Canadian Telco RequirementsAustralia Rest of WorldThis page was intentionally left blank CE Mark R& TTE Directive Vortex EF2241 Reference Manual Technical Support Conference System Design Noise and Reverberation Consider Room GainEF2241 Block Diagram EN Echo Canceller, Noise CancellerConnector Pinouts EF BusInput/Output Remote Control Port Instructions Connecting Unbalanced RCA to Balanced Mini PhoenixMaking AN EF BUS Terminator Additional Notes Warranty Information RMA# Must be on packageWhat this warranty does not cover State Law RightsEcho Canceller Definition of TermsAcoustic Echo Crosspoint Mix Minus BusNOM Attenuation NOM Bus Presets Room Gain NOMDefinition of Terms Index NOM Index Page 1725-80098-001-C