To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
1.Make sure all controls are OFF, and range hood is unplugged.
2.Place the
3.Gently separate glass covering from the housing .
4.Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W maximum.
5.Wear a glove or use a cloth to hold the new light bulb and push securely into light socket.
NOTE: DO NOT PUSH TOO HARD OR YOU MAY BREAK THE BULB CONNECTOR.
6.Put back halogen light glass cover .
7.Plug back power cord and turn on range hood to test for operation.
12