Kobe Range Hoods CX1836GS-8, CX-183 installation instructions Operating Instruction, Output Display

Page 10

OPERATING INSTRUCTION

This KOBE hood is equipped with five electronic controls with LED screen, one powe centrifugal squirrel cage with stainless steel filter, two bright 12-volt 20-watt one oil container.

The five control buttons are Power Control (On/Off), Auto Control, Speed Control ( Speed), Light Control and Timer Control. Refer to Figure 12.

Figure 12

Timer Control

Speed Control

Light Control

Power Control

Press Power Control to turn On/Off the hood.

Output Display:

Auto Control

Press Auto Control to set the hood on auto sensor. When smoke, gas, or fluct temperature* is detected, hood automatically turns on at prior speed setting. (*Temperature: Higher than normal room temperature.)

Output Display:

8

Image 10
Contents Kobe Brand Range Hood Read and Save These Instructions Please Read this Section Carefully Before Installation Important Safety InstructionsActivating any switch may cause ignition or an explosion What to Do In The Event Of a Range Top Grease FireComponents of Package Preparations before Installation InstallationPlease Read Entire Instructions Before Proceeding Page Safety Warning Check all lights and fan operation. for the homeowner Operating Instruction Page Maintenance Replace protective cover Plug in range hood 12V 20W x SpecificationsWeight lbs CX1836GS-8 48.5 53.0 SpeedAll measurements in are millimeters Measurements & DiagramsViewing Down from the TOP View from the Side Parts List Model NO. CX1836GS-8Model NO. CX1836GS-8 Circuit Diagram Disclaimer Claims will not be Accepted After the Allocated DaysTWO-YEAR Warranty Service Period WarrantyWarranty Certificate This warranty applies only Within U.S.A. and CanadaConsequential Damage ServiceMAY not Apply to YOU Implied WARRANTIES/STATE LAW Product Registration Record the Following Information for Your Record