Kobe Range Hoods CX1836GS-8, CX-183 installation instructions Maintenance

Page 12

MAINTENANCE

CAUTION: NEVER PUT YOUR HAND INTO THE AREA HOUSING THE FAN WHILE THE FAN IS OPERATING.

For the optimal level of operation, clean the range hood surface, stainless steel container regularly.

To Clean Hood Surface

CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.

-Regular care will help preserve its fine appearance.

1)Use only mild soap or detergent solutions. Dry surfaces using soft cloth.

2)If hood looks splotchy (stainless steel hood), use an orange base cleaner to surface of the hood. Avoid cleaner to get on the control switches. Spread a coating over the surface of the hood and leave on for a few minutes (do not l long or this may cause damage to hood finish). Use soft towel to wipe off th solution, gently rubs any stubborn spots. Use a slightly damp towel to get r cleaning solution. Use dry soft towel to dry the hood.

3)To bring the glow back into a stainless steel finish, use a stainless steel

4)DO NOT allow deposits to remain for long periods of time.

5)DO NOT use ordinary steel wool or steel brushes. Small bits of steel may ad surface causing rust.

6)DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds in contact with stainless steel for extended periods. Many of these compound chemicals, which may be harmful. Rinse with water after exposure and wipe dr clean cloth.

To Clean Stainless Steel Filter / Oil Container

CAUTION: DRAIN OIL CONTAINER BEFORE OIL CAN OVERFLOW.

1)The oil container attached underneath stainless steel filter can be removed counter-clockwise.

2)To clean the stainless steel filter, remove the screws (leave in a safe plac stainless steel filter out.

3)Both oil container and stainless steel filter should be washed with warm soa and dry completely before returning in place. Both are top rack dishwasher s

10

Image 12
Contents Kobe Brand Range Hood Read and Save These Instructions Please Read this Section Carefully Before Installation Important Safety InstructionsActivating any switch may cause ignition or an explosion What to Do In The Event Of a Range Top Grease FireComponents of Package Installation Preparations before InstallationPlease Read Entire Instructions Before Proceeding Page Safety Warning Check all lights and fan operation. for the homeowner Operating Instruction Page Maintenance Replace protective cover Plug in range hood Specifications Weight lbs CX1836GS-8 48.5 53.012V 20W x SpeedMeasurements & Diagrams All measurements in are millimetersViewing Down from the TOP View from the Side Parts List Model NO. CX1836GS-8Model NO. CX1836GS-8 Circuit Diagram Disclaimer Claims will not be Accepted After the Allocated DaysWarranty Warranty CertificateTWO-YEAR Warranty Service Period This warranty applies only Within U.S.A. and CanadaService Consequential DamageMAY not Apply to YOU Implied WARRANTIES/STATE LAW Product Registration Record the Following Information for Your Record