Kobe Range Hoods CX-183, CX1836GS-8 Replace protective cover Plug in range hood

Page 13

To Replace Light Bulb

CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.

1)Make sure all control switches are off, and range hood is unplugged.

2)Use a flat head screwdriver to pop out the protective covering as shown in F

3)Gently pull out the defective light bulb and discard. Light bulbs should b maximum. Refer to Figure 14. Push bulb securely into light socket.

4)Replace protective cover.

5)Plug in range hood.

Figure 13

Figure 14

11

Image 13

Contents Kobe Brand Range Hood Read and Save These Instructions Important Safety Instructions Please Read this Section Carefully Before InstallationWhat to Do In The Event Of a Range Top Grease Fire Activating any switch may cause ignition or an explosionComponents of Package Preparations before Installation InstallationPlease Read Entire Instructions Before Proceeding Page Safety Warning Check all lights and fan operation. for the homeowner Operating Instruction Page Maintenance Replace protective cover Plug in range hood Weight lbs CX1836GS-8 48.5 53.0 Specifications12V 20W x SpeedAll measurements in are millimeters Measurements & DiagramsViewing Down from the TOP View from the Side Model NO. CX1836GS-8 Parts ListModel NO. CX1836GS-8 Circuit Diagram Claims will not be Accepted After the Allocated Days DisclaimerWarranty Certificate WarrantyTWO-YEAR Warranty Service Period This warranty applies only Within U.S.A. and CanadaConsequential Damage ServiceMAY not Apply to YOU Implied WARRANTIES/STATE LAW Record the Following Information for Your Record Product Registration